How much does cabinet refacing cost in Appleton, WI?

Most Appleton homeowners spend between $2,450 – $8,600 on cabinet refacing, with an average around $5,550. Local labor prices 2% below the national average, so Appleton quotes tend to land at the lower end of national ranges.

Why is cabinet refacing more or less expensive in Appleton than elsewhere?

Licensed trade labor in Appleton runs about 98% of the national average, and the best crews book out fastest in spring and early summer. Wisconsin weather drives material choices here, so ask contractors what they install most often in Appleton and why.

Do I need a permit for cabinet refacing in Appleton, Wisconsin?

Most Appleton, WI projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Appleton?

Get at least three written quotes from licensed, insured Wisconsin contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Appleton metro market.

How much does cabinet refacing cost in 2026?

Most homeowners pay between $2,500 and $8,800, with a national average near $5,650. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per linear foot?

Installed pricing usually runs $100.00 to $350.00 per linear foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-linear foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Cabinet Refacing/Appleton, WI

Appleton metro · Wisconsin

Cabinet Refacing cost in Appleton, WI

Appleton homeowners typically pay $2,450 – $8,600 for cabinet refacing. Local labor and materials price 2% below the national average.

Get my Appleton estimate Use the Appleton calculator

Appleton average

$5,550

Typical low

$2,450

Typical high

$8,600

Per linear foot

$98 – $345

Sample ZIP

What drives Appleton pricing

Local labor

Licensed trade labor in Appleton runs about 98% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Appleton, WI projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Wisconsin weather drives material choices here, so ask contractors what they install most often in Appleton and why.

Instant cost calculator

Adjust the inputs to see live pricing

Cabinet run (linear feet)25 linear feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$3,206 – $4,394

Most homeowners pay around $3,800

Compare quality / material level

Cost by material in Appleton

Installed Appleton pricing per linear foot.

Option	Installed cost	Pros	Cons
Rigid thermofoil	$135 – $185	—	—
Wood veneer	$185 – $245	—	—
Solid wood doors	$245 – $320	—	—
Custom paint-grade solid wood	$320 – $440	—	—

Where the money goes in Appleton

A typical $5,550 Appleton project, broken down by line item.

Labor0.45% · $25
Materials0.38% · $21
Permits & inspections0.05% · $3
Overhead & profit0.12% · $7

Common add-ons

Extras that show up on Appleton quotes but rarely in the headline price.

New hardware

$98 – $590

Soft-close hinges and slides

$195 – $880

Pull-out shelving

$145 – $490

Crown molding

$295 – $1,200

Ways to save in Appleton

Reface only the uppers and paint the lowers for a two-tone look.
Reuse existing hardware if the hole spacing matches.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Appleton FAQs

Get a Appleton price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your WI ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Appleton research

Best cabinet refacing companies in Appleton Cabinet Refacing permits in Wisconsin Cabinet Refacing near me All Wisconsin prices

More Wisconsin cities

Milwaukee Madison Green Bay Kenosha

Other project costs in Appleton

Fence Installation in Appleton

$1,470 – $3,920

Roof Replacement in Appleton

$8,330 – $33,320

Kitchen Remodel in Appleton

$17,640 – $93,100

HVAC Replacement in Appleton

$5,390 – $17,640

Deck Building in Appleton

$4,312 – $11,760

Window Replacement in Appleton

$441 – $1,470

See every Appleton cost guide