How much does cabinet refacing cost in Cincinnati, OH?

Most Cincinnati homeowners spend between $2,400 – $8,350 on cabinet refacing, with an average around $5,350. Local labor prices 5% below the national average, so Cincinnati quotes tend to land at the lower end of national ranges.

Why is cabinet refacing more or less expensive in Cincinnati than elsewhere?

Licensed trade labor in Cincinnati runs about 95% of the national average, and the best crews book out fastest in spring and early summer. Ohio weather drives material choices here, so ask contractors what they install most often in Cincinnati and why.

Do I need a permit for cabinet refacing in Cincinnati, Ohio?

Most Cincinnati, OH projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Cincinnati?

Get at least three written quotes from licensed, insured Ohio contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Cincinnati metro market.

How much does cabinet refacing cost in 2026?

Most homeowners pay between $2,500 and $8,800, with a national average near $5,650. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per linear foot?

Installed pricing usually runs $100.00 to $350.00 per linear foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-linear foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Cabinet Refacing/Cincinnati, OH

Cincinnati metro · Ohio

Cabinet Refacing cost in Cincinnati, OH

Cincinnati homeowners typically pay $2,400 – $8,350 for cabinet refacing. Local labor and materials price 5% below the national average.

Get my Cincinnati estimate Use the Cincinnati calculator

Cincinnati average

$5,350

Typical low

$2,400

Typical high

$8,350

Per linear foot

$95 – $335

Sample ZIP

What drives Cincinnati pricing

Local labor

Licensed trade labor in Cincinnati runs about 95% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Cincinnati, OH projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Ohio weather drives material choices here, so ask contractors what they install most often in Cincinnati and why.

Instant cost calculator

Adjust the inputs to see live pricing

Cabinet run (linear feet)25 linear feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$3,206 – $4,275

Most homeowners pay around $3,741

Compare quality / material level

Cost by material in Cincinnati

Installed Cincinnati pricing per linear foot.

Option	Installed cost	Pros	Cons
Rigid thermofoil	$135 – $180	—	—
Wood veneer	$180 – $240	—	—
Solid wood doors	$240 – $310	—	—
Custom paint-grade solid wood	$310 – $430	—	—

Where the money goes in Cincinnati

A typical $5,350 Cincinnati project, broken down by line item.

Labor0.45% · $24
Materials0.38% · $20
Permits & inspections0.05% · $3
Overhead & profit0.12% · $6

Common add-ons

Extras that show up on Cincinnati quotes but rarely in the headline price.

New hardware

$95 – $570

Soft-close hinges and slides

$190 – $855

Pull-out shelving

$145 – $475

Crown molding

$285 – $1,150

Ways to save in Cincinnati

Reface only the uppers and paint the lowers for a two-tone look.
Reuse existing hardware if the hole spacing matches.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Cincinnati FAQs

Get a Cincinnati price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your OH ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Cincinnati research

Best cabinet refacing companies in Cincinnati Cabinet Refacing permits in Ohio Cabinet Refacing near me All Ohio prices

More Ohio cities

Columbus Cleveland Toledo Akron Dayton

Other project costs in Cincinnati

Fence Installation in Cincinnati

$1,425 – $3,800

Roof Replacement in Cincinnati

$8,075 – $32,300

Kitchen Remodel in Cincinnati

$17,100 – $90,250

HVAC Replacement in Cincinnati

$5,225 – $17,100

Deck Building in Cincinnati

$4,180 – $11,400

Window Replacement in Cincinnati

$428 – $1,425

See every Cincinnati cost guide