How much does cabinet refacing cost in Concord, NH?

Most Concord homeowners spend between $2,800 – $9,850 on cabinet refacing, with an average around $6,350. Local labor prices 12% above the national average, so Concord quotes tend to land at the higher end of national ranges.

Why is cabinet refacing more or less expensive in Concord than elsewhere?

Licensed trade labor in Concord runs about 112% of the national average, and the best crews book out fastest in spring and early summer. New Hampshire weather drives material choices here, so ask contractors what they install most often in Concord and why.

Do I need a permit for cabinet refacing in Concord, New Hampshire?

Most Concord, NH projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Concord?

Get at least three written quotes from licensed, insured New Hampshire contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Concord metro market.

How much does cabinet refacing cost in 2026?

Most homeowners pay between $2,500 and $8,800, with a national average near $5,650. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per linear foot?

Installed pricing usually runs $100.00 to $350.00 per linear foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-linear foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Cabinet Refacing/Concord, NH

Concord metro · New Hampshire

Cabinet Refacing cost in Concord, NH

Concord homeowners typically pay $2,800 – $9,850 for cabinet refacing. Local labor and materials price 12% above the national average.

Get my Concord estimate Use the Concord calculator

Concord average

$6,350

Typical low

$2,800

Typical high

$9,850

Per linear foot

$110 – $390

Sample ZIP

What drives Concord pricing

Local labor

Licensed trade labor in Concord runs about 112% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Concord, NH projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

New Hampshire weather drives material choices here, so ask contractors what they install most often in Concord and why.

Instant cost calculator

Adjust the inputs to see live pricing

Cabinet run (linear feet)25 linear feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$3,681 – $5,106

Most homeowners pay around $4,394

Compare quality / material level

Cost by material in Concord

Installed Concord pricing per linear foot.

Option	Installed cost	Pros	Cons
Rigid thermofoil	$155 – $215	—	—
Wood veneer	$215 – $280	—	—
Solid wood doors	$280 – $365	—	—
Custom paint-grade solid wood	$365 – $505	—	—

Where the money goes in Concord

A typical $6,350 Concord project, broken down by line item.

Labor0.45% · $29
Materials0.38% · $24
Permits & inspections0.05% · $3
Overhead & profit0.12% · $8

Common add-ons

Extras that show up on Concord quotes but rarely in the headline price.

New hardware

$110 – $670

Soft-close hinges and slides

$225 – $1,000

Pull-out shelving

$170 – $560

Crown molding

$335 – $1,350

Ways to save in Concord

Reface only the uppers and paint the lowers for a two-tone look.
Reuse existing hardware if the hole spacing matches.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Concord FAQs

Get a Concord price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your NH ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Concord research

Best cabinet refacing companies in Concord Cabinet Refacing permits in New Hampshire Cabinet Refacing near me All New Hampshire prices

More New Hampshire cities

Manchester Nashua Portsmouth

Other project costs in Concord

Fence Installation in Concord

$1,680 – $4,480

Roof Replacement in Concord

$9,520 – $38,080

Kitchen Remodel in Concord

$20,160 – $106,400

HVAC Replacement in Concord

$6,160 – $20,160

Deck Building in Concord

$4,928 – $13,440

Window Replacement in Concord

$504 – $1,680

See every Concord cost guide