How much does cabinet refacing cost in Des Moines, IA?

Most Des Moines homeowners spend between $2,350 – $8,200 on cabinet refacing, with an average around $5,250. Local labor prices 7% below the national average, so Des Moines quotes tend to land at the lower end of national ranges.

Why is cabinet refacing more or less expensive in Des Moines than elsewhere?

Licensed trade labor in Des Moines runs about 93% of the national average, and the best crews book out fastest in spring and early summer. Iowa weather drives material choices here, so ask contractors what they install most often in Des Moines and why.

Do I need a permit for cabinet refacing in Des Moines, Iowa?

Most Des Moines, IA projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Des Moines?

Get at least three written quotes from licensed, insured Iowa contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Des Moines metro market.

How much does cabinet refacing cost in 2026?

Most homeowners pay between $2,500 and $8,800, with a national average near $5,650. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per linear foot?

Installed pricing usually runs $100.00 to $350.00 per linear foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-linear foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Cabinet Refacing/Des Moines, IA

Des Moines metro · Iowa

Cabinet Refacing cost in Des Moines, IA

Des Moines homeowners typically pay $2,350 – $8,200 for cabinet refacing. Local labor and materials price 7% below the national average.

Get my Des Moines estimate Use the Des Moines calculator

Des Moines average

$5,250

Typical low

$2,350

Typical high

$8,200

Per linear foot

$93 – $325

Sample ZIP

What drives Des Moines pricing

Local labor

Licensed trade labor in Des Moines runs about 93% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Des Moines, IA projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Iowa weather drives material choices here, so ask contractors what they install most often in Des Moines and why.

Instant cost calculator

Adjust the inputs to see live pricing

Cabinet run (linear feet)25 linear feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$3,088 – $4,275

Most homeowners pay around $3,681

Compare quality / material level

Cost by material in Des Moines

Installed Des Moines pricing per linear foot.

Option	Installed cost	Pros	Cons
Rigid thermofoil	$130 – $180	—	—
Wood veneer	$180 – $235	—	—
Solid wood doors	$235 – $305	—	—
Custom paint-grade solid wood	$305 – $420	—	—

Where the money goes in Des Moines

A typical $5,250 Des Moines project, broken down by line item.

Labor0.45% · $24
Materials0.38% · $20
Permits & inspections0.05% · $3
Overhead & profit0.12% · $6

Common add-ons

Extras that show up on Des Moines quotes but rarely in the headline price.

New hardware

$93 – $560

Soft-close hinges and slides

$185 – $835

Pull-out shelving

$140 – $465

Crown molding

$280 – $1,100

Ways to save in Des Moines

Reface only the uppers and paint the lowers for a two-tone look.
Reuse existing hardware if the hole spacing matches.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Des Moines FAQs

Get a Des Moines price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your IA ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Des Moines research

Best cabinet refacing companies in Des Moines Cabinet Refacing permits in Iowa Cabinet Refacing near me All Iowa prices

More Iowa cities

Cedar Rapids Davenport Iowa City Ankeny

Other project costs in Des Moines

Fence Installation in Des Moines

$1,395 – $3,720

Roof Replacement in Des Moines

$7,905 – $31,620

Kitchen Remodel in Des Moines

$16,740 – $88,350

HVAC Replacement in Des Moines

$5,115 – $16,740

Deck Building in Des Moines

$4,092 – $11,160

Window Replacement in Des Moines

$419 – $1,395

See every Des Moines cost guide