How much does cabinet refacing cost in Fargo, ND?

Most Fargo homeowners spend between $2,400 – $8,450 on cabinet refacing, with an average around $5,400. Local labor prices 4% below the national average, so Fargo quotes tend to land at the lower end of national ranges.

Why is cabinet refacing more or less expensive in Fargo than elsewhere?

Licensed trade labor in Fargo runs about 96% of the national average, and the best crews book out fastest in spring and early summer. North Dakota weather drives material choices here, so ask contractors what they install most often in Fargo and why.

Do I need a permit for cabinet refacing in Fargo, North Dakota?

Most Fargo, ND projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Fargo?

Get at least three written quotes from licensed, insured North Dakota contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Fargo metro market.

How much does cabinet refacing cost in 2026?

Most homeowners pay between $2,500 and $8,800, with a national average near $5,650. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per linear foot?

Installed pricing usually runs $100.00 to $350.00 per linear foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-linear foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Cabinet Refacing/Fargo, ND

Fargo metro · North Dakota

Cabinet Refacing cost in Fargo, ND

Fargo homeowners typically pay $2,400 – $8,450 for cabinet refacing. Local labor and materials price 4% below the national average.

Get my Fargo estimate Use the Fargo calculator

Fargo average

$5,400

Typical low

$2,400

Typical high

$8,450

Per linear foot

$96 – $335

Sample ZIP

What drives Fargo pricing

Local labor

Licensed trade labor in Fargo runs about 96% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Fargo, ND projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

North Dakota weather drives material choices here, so ask contractors what they install most often in Fargo and why.

Instant cost calculator

Adjust the inputs to see live pricing

Cabinet run (linear feet)25 linear feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$3,206 – $4,394

Most homeowners pay around $3,800

Compare quality / material level

Cost by material in Fargo

Installed Fargo pricing per linear foot.

Option	Installed cost	Pros	Cons
Rigid thermofoil	$135 – $185	—	—
Wood veneer	$185 – $240	—	—
Solid wood doors	$240 – $315	—	—
Custom paint-grade solid wood	$315 – $430	—	—

Where the money goes in Fargo

A typical $5,400 Fargo project, broken down by line item.

Labor0.45% · $24
Materials0.38% · $21
Permits & inspections0.05% · $3
Overhead & profit0.12% · $6

Common add-ons

Extras that show up on Fargo quotes but rarely in the headline price.

New hardware

$96 – $575

Soft-close hinges and slides

$190 – $865

Pull-out shelving

$145 – $480

Crown molding

$290 – $1,150

Ways to save in Fargo

Reface only the uppers and paint the lowers for a two-tone look.
Reuse existing hardware if the hole spacing matches.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Fargo FAQs

Get a Fargo price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your ND ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Fargo research

Best cabinet refacing companies in Fargo Cabinet Refacing permits in North Dakota Cabinet Refacing near me All North Dakota prices

More North Dakota cities

Bismarck Grand Forks

Other project costs in Fargo

Fence Installation in Fargo

$1,440 – $3,840

Roof Replacement in Fargo

$8,160 – $32,640

Kitchen Remodel in Fargo

$17,280 – $91,200

HVAC Replacement in Fargo

$5,280 – $17,280

Deck Building in Fargo

$4,224 – $11,520

Window Replacement in Fargo

$432 – $1,440

See every Fargo cost guide