How much does cabinet refacing cost in Henderson, NV?

Most Henderson homeowners spend between $2,650 – $9,250 on cabinet refacing, with an average around $5,950. Local labor prices 5% above the national average, so Henderson quotes tend to land at the higher end of national ranges.

Why is cabinet refacing more or less expensive in Henderson than elsewhere?

Licensed trade labor in Henderson runs about 105% of the national average, and the best crews book out fastest in spring and early summer. Nevada weather drives material choices here, so ask contractors what they install most often in Henderson and why.

Do I need a permit for cabinet refacing in Henderson, Nevada?

Most Henderson, NV projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Henderson?

Get at least three written quotes from licensed, insured Nevada contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Henderson metro market.

How much does cabinet refacing cost in 2026?

Most homeowners pay between $2,500 and $8,800, with a national average near $5,650. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per linear foot?

Installed pricing usually runs $100.00 to $350.00 per linear foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-linear foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Cabinet Refacing/Henderson, NV

Henderson metro · Nevada

Cabinet Refacing cost in Henderson, NV

Henderson homeowners typically pay $2,650 – $9,250 for cabinet refacing. Local labor and materials price 5% above the national average.

Get my Henderson estimate Use the Henderson calculator

Henderson average

$5,950

Typical low

$2,650

Typical high

$9,250

Per linear foot

$105 – $370

Sample ZIP

What drives Henderson pricing

Local labor

Licensed trade labor in Henderson runs about 105% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Henderson, NV projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Nevada weather drives material choices here, so ask contractors what they install most often in Henderson and why.

Instant cost calculator

Adjust the inputs to see live pricing

Cabinet run (linear feet)25 linear feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$3,444 – $4,750

Most homeowners pay around $4,097

Compare quality / material level

Cost by material in Henderson

Installed Henderson pricing per linear foot.

Option	Installed cost	Pros	Cons
Rigid thermofoil	$145 – $200	—	—
Wood veneer	$200 – $265	—	—
Solid wood doors	$265 – $345	—	—
Custom paint-grade solid wood	$345 – $475	—	—

Where the money goes in Henderson

A typical $5,950 Henderson project, broken down by line item.

Labor0.45% · $27
Materials0.38% · $23
Permits & inspections0.05% · $3
Overhead & profit0.12% · $7

Common add-ons

Extras that show up on Henderson quotes but rarely in the headline price.

New hardware

$105 – $630

Soft-close hinges and slides

$210 – $945

Pull-out shelving

$160 – $525

Crown molding

$315 – $1,250

Ways to save in Henderson

Reface only the uppers and paint the lowers for a two-tone look.
Reuse existing hardware if the hole spacing matches.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Henderson FAQs

Get a Henderson price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your NV ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Henderson research

Best cabinet refacing companies in Henderson Cabinet Refacing permits in Nevada Cabinet Refacing near me All Nevada prices

More Nevada cities

Las Vegas Reno North Las Vegas Sparks Carson City

Other project costs in Henderson

Fence Installation in Henderson

$1,575 – $4,200

Roof Replacement in Henderson

$8,925 – $35,700

Kitchen Remodel in Henderson

$18,900 – $99,750

HVAC Replacement in Henderson

$5,775 – $18,900

Deck Building in Henderson

$4,620 – $12,600

Window Replacement in Henderson

$473 – $1,575

See every Henderson cost guide