How much does cabinet refacing cost in Marietta, GA?

Most Marietta homeowners spend between $2,500 – $8,800 on cabinet refacing, with an average around $5,650. Local labor prices right at the national average, so Marietta quotes tend to land at the higher end of national ranges.

Why is cabinet refacing more or less expensive in Marietta than elsewhere?

Licensed trade labor in Marietta runs about 100% of the national average, and the best crews book out fastest in spring and early summer. Georgia weather drives material choices here, so ask contractors what they install most often in Marietta and why.

Do I need a permit for cabinet refacing in Marietta, Georgia?

Most Marietta, GA projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Marietta?

Get at least three written quotes from licensed, insured Georgia contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Marietta metro market.

How much does cabinet refacing cost in 2026?

Most homeowners pay between $2,500 and $8,800, with a national average near $5,650. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per linear foot?

Installed pricing usually runs $100.00 to $350.00 per linear foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-linear foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Cabinet Refacing/Marietta, GA

Marietta metro · Georgia

Cabinet Refacing cost in Marietta, GA

Marietta homeowners typically pay $2,500 – $8,800 for cabinet refacing. Local labor and materials price right at the national average.

Get my Marietta estimate Use the Marietta calculator

Marietta average

$5,650

Typical low

$2,500

Typical high

$8,800

Per linear foot

$100 – $350

Sample ZIP

What drives Marietta pricing

Local labor

Licensed trade labor in Marietta runs about 100% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Marietta, GA projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Georgia weather drives material choices here, so ask contractors what they install most often in Marietta and why.

Instant cost calculator

Adjust the inputs to see live pricing

Cabinet run (linear feet)25 linear feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$3,325 – $4,513

Most homeowners pay around $3,919

Compare quality / material level

Cost by material in Marietta

Installed Marietta pricing per linear foot.

Option	Installed cost	Pros	Cons
Rigid thermofoil	$140 – $190	—	—
Wood veneer	$190 – $250	—	—
Solid wood doors	$250 – $325	—	—
Custom paint-grade solid wood	$325 – $450	—	—

Where the money goes in Marietta

A typical $5,650 Marietta project, broken down by line item.

Labor0.45% · $25
Materials0.38% · $21
Permits & inspections0.05% · $3
Overhead & profit0.12% · $7

Common add-ons

Extras that show up on Marietta quotes but rarely in the headline price.

New hardware

$100 – $600

Soft-close hinges and slides

$200 – $900

Pull-out shelving

$150 – $500

Crown molding

$300 – $1,200

Ways to save in Marietta

Reface only the uppers and paint the lowers for a two-tone look.
Reuse existing hardware if the hole spacing matches.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Marietta FAQs

Get a Marietta price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your GA ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Marietta research

Best cabinet refacing companies in Marietta Cabinet Refacing permits in Georgia Cabinet Refacing near me All Georgia prices

More Georgia cities

Atlanta Savannah Augusta Columbus Macon Athens Alpharetta Sandy Springs

Other project costs in Marietta

Fence Installation in Marietta

$1,500 – $4,000

Roof Replacement in Marietta

$8,500 – $34,000

Kitchen Remodel in Marietta

$18,000 – $95,000

HVAC Replacement in Marietta

$5,500 – $18,000

Deck Building in Marietta

$4,400 – $12,000

Window Replacement in Marietta

$450 – $1,500

See every Marietta cost guide