PriceBee
Greater Toronto Area · Ontario

Cabinet Refacing cost in Oakville, ON

Oakville homeowners typically pay $3,500 – $12,300 for cabinet refacing. Local labor and materials price 40% above the national average.

Oakville average

$7,900

Typical low

$3,500

Typical high

$12,300

Per linear foot

$140 – $490

Sample ZIP

L6H

What drives Oakville pricing

Local labor

Skilled trades across Oakville are unionised or association-backed, and GTA labour rates run well above the North American average — expect quotes in Canadian dollars roughly 40% higher than the US benchmark once exchange and local wages are factored in. Winter shuts down much exterior work, so the spring-to-fall window is the busiest and priciest.

Permits & code

Oakville issues building permits through its municipal building department under the Ontario Building Code. Electrical work needs an ESA (Electrical Safety Authority) notification and inspection, gas work must be done by a TSSA-certified installer, and HVAC changes should be sized by an HRAI-trained contractor. New-home and major-renovation work may fall under Tarion warranty coverage, and lots near a river or ravine can require Conservation Authority approval before the city will issue a permit.

Climate & conditions

Oakville has a cold continental climate with freeze-thaw cycles, heavy snow load and humid summers. Expect frost-depth footings, ice-and-water shielding on roofs, insulation upgrades to meet Ontario energy requirements, and exterior work scheduled between April and November.

Instant cost calculator

Adjust the inputs to see live pricing

25 linear feet

Estimated project cost

$4,631 $6,413

Most homeowners pay around $5,522

Compare quality / material level

Cost by material in Oakville

Installed Oakville pricing per linear foot.

OptionInstalled cost
Rigid thermofoil$195 – $270
Wood veneer$270 – $355
Solid wood doors$355 – $455
Custom paint-grade solid wood$455 – $630

Where the money goes in Oakville

A typical $7,900 Oakville project, broken down by line item.

  • Labor0.45% · $36
  • Materials0.38% · $30
  • Permits & inspections0.05% · $4
  • Overhead & profit0.12% · $9

Common add-ons

Extras that show up on Oakville quotes but rarely in the headline price.

New hardware

$140 – $840

Soft-close hinges and slides

$280 – $1,250

Pull-out shelving

$210 – $700

Crown molding

$420 – $1,700

Ways to save in Oakville

  • Reface only the uppers and paint the lowers for a two-tone look.
  • Reuse existing hardware if the hole spacing matches.
  • Collect three written bids on an identical scope — spreads of 20–40% are normal.
  • Book in the off-season and stay flexible on the start date to save 5–15%.
  • Bundle nearby work into one mobilization so you only pay setup and travel once.
  • Ask what the contractor would change to cut 10% without hurting durability.

Oakville FAQs

Get a Oakville price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your ON ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Oakville research

Cabinet Refacing cost near Oakville

More Ontario cities

Other project costs in Oakville