How much does cabinet refacing cost in Rockville, MD?

Most Rockville homeowners spend between $3,100 – $10,800 on cabinet refacing, with an average around $6,950. Local labor prices 23% above the national average, so Rockville quotes tend to land at the higher end of national ranges.

Why is cabinet refacing more or less expensive in Rockville than elsewhere?

Licensed trade labor in Rockville runs about 123% of the national average, and the best crews book out fastest in spring and early summer. Maryland weather drives material choices here, so ask contractors what they install most often in Rockville and why.

Do I need a permit for cabinet refacing in Rockville, Maryland?

Most Rockville, MD projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Rockville?

Get at least three written quotes from licensed, insured Maryland contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Rockville metro market.

How much does cabinet refacing cost in 2026?

Most homeowners pay between $2,500 and $8,800, with a national average near $5,650. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per linear foot?

Installed pricing usually runs $100.00 to $350.00 per linear foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-linear foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Cabinet Refacing/Rockville, MD

Rockville metro · Maryland

Cabinet Refacing cost in Rockville, MD

Rockville homeowners typically pay $3,100 – $10,800 for cabinet refacing. Local labor and materials price 23% above the national average.

Get my Rockville estimate Use the Rockville calculator

Rockville average

$6,950

Typical low

$3,100

Typical high

$10,800

Per linear foot

$125 – $430

Sample ZIP

What drives Rockville pricing

Local labor

Licensed trade labor in Rockville runs about 123% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Rockville, MD projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Maryland weather drives material choices here, so ask contractors what they install most often in Rockville and why.

Instant cost calculator

Adjust the inputs to see live pricing

Cabinet run (linear feet)25 linear feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$4,038 – $5,581

Most homeowners pay around $4,809

Compare quality / material level

Cost by material in Rockville

Installed Rockville pricing per linear foot.

Option	Installed cost	Pros	Cons
Rigid thermofoil	$170 – $235	—	—
Wood veneer	$235 – $310	—	—
Solid wood doors	$310 – $400	—	—
Custom paint-grade solid wood	$400 – $555	—	—

Where the money goes in Rockville

A typical $6,950 Rockville project, broken down by line item.

Labor0.45% · $31
Materials0.38% · $26
Permits & inspections0.05% · $3
Overhead & profit0.12% · $8

Common add-ons

Extras that show up on Rockville quotes but rarely in the headline price.

New hardware

$125 – $740

Soft-close hinges and slides

$245 – $1,100

Pull-out shelving

$185 – $615

Crown molding

$370 – $1,500

Ways to save in Rockville

Reface only the uppers and paint the lowers for a two-tone look.
Reuse existing hardware if the hole spacing matches.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Rockville FAQs

Get a Rockville price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your MD ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Rockville research

Best cabinet refacing companies in Rockville Cabinet Refacing permits in Maryland Cabinet Refacing near me All Maryland prices

More Maryland cities

Baltimore Columbia Silver Spring Annapolis Frederick

Other project costs in Rockville

Fence Installation in Rockville

$1,845 – $4,920

Roof Replacement in Rockville

$10,455 – $41,820

Kitchen Remodel in Rockville

$22,140 – $116,850

HVAC Replacement in Rockville

$6,765 – $22,140

Deck Building in Rockville

$5,412 – $14,760

Window Replacement in Rockville

$554 – $1,845

See every Rockville cost guide