How much does cabinet refacing cost in Sioux Falls, SD?

Most Sioux Falls homeowners spend between $2,300 – $8,100 on cabinet refacing, with an average around $5,200. Local labor prices 8% below the national average, so Sioux Falls quotes tend to land at the lower end of national ranges.

Why is cabinet refacing more or less expensive in Sioux Falls than elsewhere?

Licensed trade labor in Sioux Falls runs about 92% of the national average, and the best crews book out fastest in spring and early summer. South Dakota weather drives material choices here, so ask contractors what they install most often in Sioux Falls and why.

Do I need a permit for cabinet refacing in Sioux Falls, South Dakota?

Most Sioux Falls, SD projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Sioux Falls?

Get at least three written quotes from licensed, insured South Dakota contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Sioux Falls metro market.

How much does cabinet refacing cost in 2026?

Most homeowners pay between $2,500 and $8,800, with a national average near $5,650. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per linear foot?

Installed pricing usually runs $100.00 to $350.00 per linear foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-linear foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Cabinet Refacing/Sioux Falls, SD

Sioux Falls metro · South Dakota

Cabinet Refacing cost in Sioux Falls, SD

Sioux Falls homeowners typically pay $2,300 – $8,100 for cabinet refacing. Local labor and materials price 8% below the national average.

Get my Sioux Falls estimate Use the Sioux Falls calculator

Sioux Falls average

$5,200

Typical low

$2,300

Typical high

$8,100

Per linear foot

$92 – $320

Sample ZIP

What drives Sioux Falls pricing

Local labor

Licensed trade labor in Sioux Falls runs about 92% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Sioux Falls, SD projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

South Dakota weather drives material choices here, so ask contractors what they install most often in Sioux Falls and why.

Instant cost calculator

Adjust the inputs to see live pricing

Cabinet run (linear feet)25 linear feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$3,088 – $4,156

Most homeowners pay around $3,622

Compare quality / material level

Cost by material in Sioux Falls

Installed Sioux Falls pricing per linear foot.

Option	Installed cost	Pros	Cons
Rigid thermofoil	$130 – $175	—	—
Wood veneer	$175 – $230	—	—
Solid wood doors	$230 – $300	—	—
Custom paint-grade solid wood	$300 – $415	—	—

Where the money goes in Sioux Falls

A typical $5,200 Sioux Falls project, broken down by line item.

Labor0.45% · $23
Materials0.38% · $20
Permits & inspections0.05% · $3
Overhead & profit0.12% · $6

Common add-ons

Extras that show up on Sioux Falls quotes but rarely in the headline price.

New hardware

$92 – $550

Soft-close hinges and slides

$185 – $830

Pull-out shelving

$140 – $460

Crown molding

$275 – $1,100

Ways to save in Sioux Falls

Reface only the uppers and paint the lowers for a two-tone look.
Reuse existing hardware if the hole spacing matches.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Sioux Falls FAQs

Get a Sioux Falls price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your SD ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Sioux Falls research

Best cabinet refacing companies in Sioux Falls Cabinet Refacing permits in South Dakota Cabinet Refacing near me All South Dakota prices

More South Dakota cities

Rapid City Aberdeen

Other project costs in Sioux Falls

Fence Installation in Sioux Falls

$1,380 – $3,680

Roof Replacement in Sioux Falls

$7,820 – $31,280

Kitchen Remodel in Sioux Falls

$16,560 – $87,400

HVAC Replacement in Sioux Falls

$5,060 – $16,560

Deck Building in Sioux Falls

$4,048 – $11,040

Window Replacement in Sioux Falls

$414 – $1,380

See every Sioux Falls cost guide