How much does cabinet refacing cost in Southaven, MS?

Most Southaven homeowners spend between $2,150 – $7,550 on cabinet refacing, with an average around $4,850. Local labor prices 14% below the national average, so Southaven quotes tend to land at the lower end of national ranges.

Why is cabinet refacing more or less expensive in Southaven than elsewhere?

Licensed trade labor in Southaven runs about 86% of the national average, and the best crews book out fastest in spring and early summer. Mississippi weather drives material choices here, so ask contractors what they install most often in Southaven and why.

Do I need a permit for cabinet refacing in Southaven, Mississippi?

Most Southaven, MS projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Southaven?

Get at least three written quotes from licensed, insured Mississippi contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Southaven metro market.

How much does cabinet refacing cost in 2026?

Most homeowners pay between $2,500 and $8,800, with a national average near $5,650. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per linear foot?

Installed pricing usually runs $100.00 to $350.00 per linear foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-linear foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Cabinet Refacing/Southaven, MS

Southaven metro · Mississippi

Cabinet Refacing cost in Southaven, MS

Southaven homeowners typically pay $2,150 – $7,550 for cabinet refacing. Local labor and materials price 14% below the national average.

Get my Southaven estimate Use the Southaven calculator

Southaven average

$4,850

Typical low

$2,150

Typical high

$7,550

Per linear foot

$86 – $300

Sample ZIP

What drives Southaven pricing

Local labor

Licensed trade labor in Southaven runs about 86% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Southaven, MS projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Mississippi weather drives material choices here, so ask contractors what they install most often in Southaven and why.

Instant cost calculator

Adjust the inputs to see live pricing

Cabinet run (linear feet)25 linear feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$2,850 – $3,919

Most homeowners pay around $3,384

Compare quality / material level

Cost by material in Southaven

Installed Southaven pricing per linear foot.

Option	Installed cost	Pros	Cons
Rigid thermofoil	$120 – $165	—	—
Wood veneer	$165 – $215	—	—
Solid wood doors	$215 – $280	—	—
Custom paint-grade solid wood	$280 – $385	—	—

Where the money goes in Southaven

A typical $4,850 Southaven project, broken down by line item.

Labor0.45% · $22
Materials0.38% · $18
Permits & inspections0.05% · $2
Overhead & profit0.12% · $6

Common add-ons

Extras that show up on Southaven quotes but rarely in the headline price.

New hardware

$86 – $515

Soft-close hinges and slides

$170 – $775

Pull-out shelving

$130 – $430

Crown molding

$260 – $1,050

Ways to save in Southaven

Reface only the uppers and paint the lowers for a two-tone look.
Reuse existing hardware if the hole spacing matches.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Southaven FAQs

Get a Southaven price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your MS ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Southaven research

Best cabinet refacing companies in Southaven Cabinet Refacing permits in Mississippi Cabinet Refacing near me All Mississippi prices

More Mississippi cities

Jackson Gulfport Hattiesburg

Other project costs in Southaven

Fence Installation in Southaven

$1,290 – $3,440

Roof Replacement in Southaven

$7,310 – $29,240

Kitchen Remodel in Southaven

$15,480 – $81,700

HVAC Replacement in Southaven

$4,730 – $15,480

Deck Building in Southaven

$3,784 – $10,320

Window Replacement in Southaven

$387 – $1,290

See every Southaven cost guide