How much does cabinet refacing cost in St. Louis, MO?

Most St. Louis homeowners spend between $2,350 – $8,250 on cabinet refacing, with an average around $5,300. Local labor prices 6% below the national average, so St. Louis quotes tend to land at the lower end of national ranges.

Why is cabinet refacing more or less expensive in St. Louis than elsewhere?

Licensed trade labor in St. Louis runs about 94% of the national average, and the best crews book out fastest in spring and early summer. Missouri weather drives material choices here, so ask contractors what they install most often in St. Louis and why.

Do I need a permit for cabinet refacing in St. Louis, Missouri?

Most St. Louis, MO projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in St. Louis?

Get at least three written quotes from licensed, insured Missouri contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the St. Louis metro market.

How much does cabinet refacing cost in 2026?

Most homeowners pay between $2,500 and $8,800, with a national average near $5,650. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per linear foot?

Installed pricing usually runs $100.00 to $350.00 per linear foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-linear foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Cabinet Refacing/St. Louis, MO

St. Louis metro · Missouri

Cabinet Refacing cost in St. Louis, MO

St. Louis homeowners typically pay $2,350 – $8,250 for cabinet refacing. Local labor and materials price 6% below the national average.

Get my St. Louis estimate Use the St. Louis calculator

St. Louis average

$5,300

Typical low

$2,350

Typical high

$8,250

Per linear foot

$94 – $330

Sample ZIP

What drives St. Louis pricing

Local labor

Licensed trade labor in St. Louis runs about 94% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most St. Louis, MO projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Missouri weather drives material choices here, so ask contractors what they install most often in St. Louis and why.

Instant cost calculator

Adjust the inputs to see live pricing

Cabinet run (linear feet)25 linear feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$3,088 – $4,275

Most homeowners pay around $3,681

Compare quality / material level

Cost by material in St. Louis

Installed St. Louis pricing per linear foot.

Option	Installed cost	Pros	Cons
Rigid thermofoil	$130 – $180	—	—
Wood veneer	$180 – $235	—	—
Solid wood doors	$235 – $305	—	—
Custom paint-grade solid wood	$305 – $425	—	—

Where the money goes in St. Louis

A typical $5,300 St. Louis project, broken down by line item.

Labor0.45% · $24
Materials0.38% · $20
Permits & inspections0.05% · $3
Overhead & profit0.12% · $6

Common add-ons

Extras that show up on St. Louis quotes but rarely in the headline price.

New hardware

$94 – $565

Soft-close hinges and slides

$190 – $845

Pull-out shelving

$140 – $470

Crown molding

$280 – $1,150

Ways to save in St. Louis

Reface only the uppers and paint the lowers for a two-tone look.
Reuse existing hardware if the hole spacing matches.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

St. Louis FAQs

Get a St. Louis price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your MO ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More St. Louis research

Best cabinet refacing companies in St. Louis Cabinet Refacing permits in Missouri Cabinet Refacing near me All Missouri prices

More Missouri cities

Kansas City Springfield Columbia Independence

Other project costs in St. Louis

Fence Installation in St. Louis

$1,410 – $3,760

Roof Replacement in St. Louis

$7,990 – $31,960

Kitchen Remodel in St. Louis

$16,920 – $89,300

HVAC Replacement in St. Louis

$5,170 – $16,920

Deck Building in St. Louis

$4,136 – $11,280

Window Replacement in St. Louis

$423 – $1,410

See every St. Louis cost guide