How much does cabinet refacing cost in Washington, DC?

Most Washington homeowners spend between $3,250 – $11,400 on cabinet refacing, with an average around $7,350. Local labor prices 30% above the national average, so Washington quotes tend to land at the higher end of national ranges.

Why is cabinet refacing more or less expensive in Washington than elsewhere?

Licensed trade labor in Washington runs about 130% of the national average, and the best crews book out fastest in spring and early summer. District of Columbia weather drives material choices here, so ask contractors what they install most often in Washington and why.

Do I need a permit for cabinet refacing in Washington, District of Columbia?

Most Washington, DC projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Washington?

Get at least three written quotes from licensed, insured District of Columbia contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Washington metro market.

How much does cabinet refacing cost in 2026?

Most homeowners pay between $2,500 and $8,800, with a national average near $5,650. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per linear foot?

Installed pricing usually runs $100.00 to $350.00 per linear foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-linear foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Cabinet Refacing/Washington, DC

Washington metro · District of Columbia

Cabinet Refacing cost in Washington, DC

Washington homeowners typically pay $3,250 – $11,400 for cabinet refacing. Local labor and materials price 30% above the national average.

Get my Washington estimate Use the Washington calculator

Washington average

$7,350

Typical low

$3,250

Typical high

$11,400

Per linear foot

$130 – $455

Sample ZIP

What drives Washington pricing

Local labor

Licensed trade labor in Washington runs about 130% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Washington, DC projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

District of Columbia weather drives material choices here, so ask contractors what they install most often in Washington and why.

Instant cost calculator

Adjust the inputs to see live pricing

Cabinet run (linear feet)25 linear feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$4,275 – $5,938

Most homeowners pay around $5,106

Compare quality / material level

Cost by material in Washington

Installed Washington pricing per linear foot.

Option	Installed cost	Pros	Cons
Rigid thermofoil	$180 – $250	—	—
Wood veneer	$250 – $330	—	—
Solid wood doors	$330 – $425	—	—
Custom paint-grade solid wood	$425 – $585	—	—

Where the money goes in Washington

A typical $7,350 Washington project, broken down by line item.

Labor0.45% · $33
Materials0.38% · $28
Permits & inspections0.05% · $4
Overhead & profit0.12% · $9

Common add-ons

Extras that show up on Washington quotes but rarely in the headline price.

New hardware

$130 – $780

Soft-close hinges and slides

$260 – $1,150

Pull-out shelving

$195 – $650

Crown molding

$390 – $1,550

Ways to save in Washington

Reface only the uppers and paint the lowers for a two-tone look.
Reuse existing hardware if the hole spacing matches.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Washington FAQs

Get a Washington price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your DC ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Washington research

Best cabinet refacing companies in Washington Cabinet Refacing permits in District of Columbia Cabinet Refacing near me All District of Columbia prices

Other project costs in Washington

Fence Installation in Washington

$1,950 – $5,200

Roof Replacement in Washington

$11,050 – $44,200

Kitchen Remodel in Washington

$23,400 – $123,500

HVAC Replacement in Washington

$7,150 – $23,400

Deck Building in Washington

$5,720 – $15,600

Window Replacement in Washington

$585 – $1,950

See every Washington cost guide