How much does chimney repair cost in Grand Forks, ND?

Most Grand Forks homeowners spend between $425 – $3,300 on chimney repair, with an average around $1,850. Local labor prices 6% below the national average, so Grand Forks quotes tend to land at the lower end of national ranges.

Why is chimney repair more or less expensive in Grand Forks than elsewhere?

Licensed trade labor in Grand Forks runs about 94% of the national average, and the best crews book out fastest in spring and early summer. North Dakota weather drives material choices here, so ask contractors what they install most often in Grand Forks and why.

Do I need a permit for chimney repair in Grand Forks, North Dakota?

Most Grand Forks, ND projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Grand Forks?

Get at least three written quotes from licensed, insured North Dakota contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Grand Forks metro market.

How much does chimney repair cost in 2026?

Most homeowners pay between $450 and $3,500, with a national average near $1,975. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per job?

Installed pricing usually runs $450.00 to $3,500.00 per job, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-job price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Chimney Repair/Grand Forks, ND

Grand Forks metro · North Dakota

Chimney Repair cost in Grand Forks, ND

Grand Forks homeowners typically pay $425 – $3,300 for chimney repair. Local labor and materials price 6% below the national average.

Get my Grand Forks estimate Use the Grand Forks calculator

Grand Forks average

$1,850

Typical low

$425

Typical high

$3,300

Per job

$425 – $3,300

Sample ZIP

What drives Grand Forks pricing

Local labor

Licensed trade labor in Grand Forks runs about 94% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Grand Forks, ND projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

North Dakota weather drives material choices here, so ask contractors what they install most often in Grand Forks and why.

Instant cost calculator

Adjust the inputs to see live pricing

Repair scope (jobs)1 job

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$1,093 – $1,520

Most homeowners pay around $1,306

Compare quality / material level

Cost by material in Grand Forks

Installed Grand Forks pricing per job.

Option	Installed cost	Pros	Cons
Sweep and minor sealing	$1,150 – $1,600	—	—
Crown repair and waterproofing	$1,600 – $2,100	—	—
Partial rebuild and tuckpointing	$2,100 – $2,700	—	—
Full rebuild with new liner	$2,700 – $3,700	—	—

Where the money goes in Grand Forks

A typical $1,850 Grand Forks project, broken down by line item.

Labor0.45% · $8
Materials0.38% · $7
Permits & inspections0.05% · $1
Overhead & profit0.12% · $2

Common add-ons

Extras that show up on Grand Forks quotes but rarely in the headline price.

Stainless steel liner

$1,400 – $4,700

Chimney cap

$140 – $565

Flashing replacement

$280 – $1,400

Waterproof sealant

$280 – $845

Ways to save in Grand Forks

Have the sweep and inspection done together in late summer.
Waterproof the crown early — it prevents most rebuild-level damage.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Grand Forks FAQs

Get a Grand Forks price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your ND ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Grand Forks research

Best chimney repair companies in Grand Forks Chimney Repair permits in North Dakota Chimney Repair near me All North Dakota prices

More North Dakota cities

Fargo Bismarck

Other project costs in Grand Forks

Fence Installation in Grand Forks

$1,410 – $3,760

Roof Replacement in Grand Forks

$7,990 – $31,960

Kitchen Remodel in Grand Forks

$16,920 – $89,300

HVAC Replacement in Grand Forks

$5,170 – $16,920

Deck Building in Grand Forks

$4,136 – $11,280

Window Replacement in Grand Forks

$423 – $1,410

See every Grand Forks cost guide