How much does countertop installation cost in 2026?

Most homeowners pay between $1,800 and $5,400, with a national average near $3,600. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per square foot?

Installed pricing usually runs $40.00 to $120.00 per square foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-square foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

When is the cheapest time to book?

Off-season and shoulder months. Booking outside the spring–summer rush, and staying flexible on start dates, commonly saves 5–15% because crews are filling calendar gaps.

Yes. Contractor financing, a home equity line, or a 0% promotional card are all common. Compare the total interest cost against paying cash — promotional financing is sometimes priced into a higher bid.

How do I avoid getting overcharged?

Get the scope in writing with materials by brand and model, quantities, exclusions, permit responsibility, payment schedule and warranty. Never pay more than one third up front, and never pay in full before the final inspection.

Is quartz or granite cheaper?

They overlap. Granite runs about $40–$100 per square foot installed, quartz $50–$120. Quartz never needs sealing, which saves maintenance cost over time.

How long does countertop installation take?

Templating takes an hour, fabrication one to three weeks, and installation a single day.

Do I need to seal my countertops?

Granite and marble need sealing every one to three years. Quartz and laminate never do.

Home/Cost guides/Countertop Installation

Construction

How much does countertop installation cost?

Countertop Installation costs $1,800 to $5,400 for a typical project, averaging about $3,600. Installed pricing usually runs $40.00 to $120.00 per square foot, and scope, materials, access and local labor rates explain nearly all of the variation.

Get my personalized estimate Use the calculator

National average

$3,600

Typical low

$1,800

Typical high

$5,400

Per square foot

$40 – $120

Instant cost calculator

Adjust the inputs to see live pricing

Countertop area (sq ft)45 square feet

Quality / material level

Site access

Removal / prep work

Timing

Region

Estimated project cost

$2,438 – $3,343

Most homeowners pay around $2,891

Compare quality / material level

Cost by material

Installed pricing per square foot.

Option	Installed cost	Pros	Cons
Laminate	$50 – $68	—	—
Granite	$68 – $90	—	—
Quartz	$90 – $116	—	—
Marble or premium quartzite	$116 – $160	—	—

Countertop Installation cost by project size

Typical installed pricing before local adjustments.

Project size	Budget	Average	Premium
23 square foots	$920	$1,840	$2,760
45 square foots	$1,800	$3,600	$5,400
68 square foots	$2,720	$5,440	$8,160
90 square foots	$3,600	$7,200	$10,800

Countertop Installation cost by material or quality level

Option	Price range	Best for
Laminate	$49.60 – $68.00 / square foot	Lowest upfront cost, shortest lifespan
Granite	$68.00 – $89.60 / square foot	Best overall value for most homes
Quartz	$89.60 – $116.00 / square foot	Longer warranty and better finish
Marble or premium quartzite	$116.00 – $160.00 / square foot	Top-tier materials and custom detailing

Where the money goes

A typical project budget, broken down by line item.

Labor0.45% · $16
Materials0.38% · $14
Permits & inspections0.05% · $2
Overhead & profit0.12% · $4

Cost by region

Labor markets move the number more than any other single factor.

Northeast

$2,070 – $6,210

+15% vs. national average

West

$2,124 – $6,372

+18% vs. national average

Midwest

$1,728 – $5,184

-4% vs. national average

South

$1,692 – $5,076

-6% vs. national average

Common add-ons

Line items that show up on most quotes but rarely in the headline price.

Sink cutout and install

$150 – $500

Cooktop cutout

$100 – $300

Edge upgrade

$10 – $40

Old countertop removal

$150 – $500

DIY vs. hiring a pro

Hire a pro

$1,800 – $5,400

Do it yourself

$810 – $2,970

DIY saves labor but not materials, permits or rework. Only take it on if the job does not require a licensed trade or inspection.

Ways to save

Practical levers that lower the bill without cutting quality.

Buy remnant slabs for islands and vanities — often 40% off.
Keep a standard eased edge instead of ogee or waterfall.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Questions to ask your contractor

01Are you licensed and insured in my city, and can I see the certificate?
02Is this a fixed-price bid or an estimate that can change?
03What exactly is excluded from the quote?
04Who pulls the permit and who schedules inspections?
05What is the written workmanship warranty and how long does it last?
06What is the payment schedule, and how much is due up front?
07How long will the work take, and what could delay it?

Frequently asked questions

Ready for a number you can budget against?

Answer a few questions about your project and we'll model a low, average and premium price for your ZIP code — then connect you with vetted pros.

Get free quotes from certified pros

Countertop Installation cost by city

Local labor rates, permits and climate change the number. Pick your city for prices near you.

Countertop Installation cost in Los Angeles, CA

$2,232 – $6,696

Countertop Installation cost in San Diego, CA

$2,124 – $6,372

Countertop Installation cost in San Jose, CA

$2,484 – $7,452

Countertop Installation cost in San Francisco, CA

$2,610 – $7,830

Countertop Installation cost in Oakland, CA

$2,376 – $7,128

Countertop Installation cost in Sacramento, CA

$1,944 – $5,832

Countertop Installation cost in Fresno, CA

$1,764 – $5,292

Countertop Installation cost in Long Beach, CA

$2,196 – $6,588

Countertop Installation cost in Anaheim, CA

$2,160 – $6,480

Countertop Installation cost in Santa Ana, CA

$2,142 – $6,426

Countertop Installation cost in Irvine, CA

$2,268 – $6,804

Countertop Installation cost in Riverside, CA

$1,908 – $5,724

Countertop Installation cost in San Bernardino, CA

$1,854 – $5,562

Countertop Installation cost in Bakersfield, CA

$1,746 – $5,238

Countertop Installation cost in Stockton, CA

$1,836 – $5,508

Countertop Installation cost in Modesto, CA

$1,800 – $5,400

Countertop Installation cost in Chula Vista, CA

$2,070 – $6,210

Countertop Installation cost in Fremont, CA

$2,430 – $7,290

Countertop Installation cost in Pasadena, CA

$2,304 – $6,912

Countertop Installation cost in Glendale, CA

$2,250 – $6,750

Countertop Installation cost in Santa Clarita, CA

$2,088 – $6,264

Countertop Installation cost in Torrance, CA

$2,214 – $6,642

Countertop Installation cost in Oxnard, CA

$2,052 – $6,156

Countertop Installation cost in San Mateo, CA

$2,520 – $7,560

See all cities