How much does drywall installation cost in Salt Lake City, UT?

Most Salt Lake City homeowners spend between $1,600 – $3,750 on drywall installation, with an average around $2,700. Local labor prices 7% above the national average, so Salt Lake City quotes tend to land at the higher end of national ranges.

Why is drywall installation more or less expensive in Salt Lake City than elsewhere?

Licensed trade labor in Salt Lake City runs about 107% of the national average, and the best crews book out fastest in spring and early summer. Utah weather drives material choices here, so ask contractors what they install most often in Salt Lake City and why.

Do I need a permit for drywall installation in Salt Lake City, Utah?

Most Salt Lake City, UT projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Salt Lake City?

Get at least three written quotes from licensed, insured Utah contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Salt Lake City metro market.

How much does drywall installation cost in 2026?

Most homeowners pay between $1,500 and $3,500, with a national average near $2,500. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per square foot?

Installed pricing usually runs $1.50 to $3.50 per square foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-square foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Drywall Installation/Salt Lake City, UT

Salt Lake City metro · Utah

Drywall Installation cost in Salt Lake City, UT

Salt Lake City homeowners typically pay $1,600 – $3,750 for drywall installation. Local labor and materials price 7% above the national average.

Get my Salt Lake City estimate Use the Salt Lake City calculator

Salt Lake City average

$2,700

Typical low

$1,600

Typical high

$3,750

Per square foot

$2 – $4

Sample ZIP

What drives Salt Lake City pricing

Local labor

Licensed trade labor in Salt Lake City runs about 107% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Salt Lake City, UT projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Utah weather drives material choices here, so ask contractors what they install most often in Salt Lake City and why.

Instant cost calculator

Adjust the inputs to see live pricing

Drywall area (sq ft)1,000 square feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$1,577 – $2,166

Most homeowners pay around $1,872

Compare quality / material level

Cost by material in Salt Lake City

Installed Salt Lake City pricing per square foot.

Option	Installed cost	Pros	Cons
Hang only	$2 – $2	—	—
Hang, tape and finish (Level 4)	$2 – $3	—	—
Level 5 smooth finish	$3 – $4	—	—
Moisture / fire-rated assemblies	$4 – $5	—	—

Where the money goes in Salt Lake City

A typical $2,700 Salt Lake City project, broken down by line item.

Labor0.45% · $12
Materials0.38% · $10
Permits & inspections0.05% · $1
Overhead & profit0.12% · $3

Common add-ons

Extras that show up on Salt Lake City quotes but rarely in the headline price.

Ceiling texture removal

$535 – $2,700

Insulation before board

$430 – $2,150

Corner bead and archways

$160 – $855

Painting after finish

$535 – $2,700

Ways to save in Salt Lake City

Order board delivered to the room to avoid carry charges.
Accept a Level 4 finish unless walls take raking light.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Salt Lake City FAQs

Get a Salt Lake City price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your UT ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Salt Lake City research

Best drywall installation companies in Salt Lake City Drywall Installation permits in Utah Drywall Installation near me All Utah prices

More Utah cities

Provo West Valley City Ogden St. George Lehi

Other project costs in Salt Lake City

Fence Installation in Salt Lake City

$1,605 – $4,280

Roof Replacement in Salt Lake City

$9,095 – $36,380

Kitchen Remodel in Salt Lake City

$19,260 – $101,650

HVAC Replacement in Salt Lake City

$5,885 – $19,260

Deck Building in Salt Lake City

$4,708 – $12,840

Window Replacement in Salt Lake City

$482 – $1,605

See every Salt Lake City cost guide