How much does electrical panel upgrade cost in Myrtle Beach, SC?

Most Myrtle Beach homeowners spend between $1,750 – $4,300 on electrical panel upgrade, with an average around $2,800. Local labor prices 4% below the national average, so Myrtle Beach quotes tend to land at the lower end of national ranges.

Why is electrical panel upgrade more or less expensive in Myrtle Beach than elsewhere?

Licensed trade labor in Myrtle Beach runs about 96% of the national average, and the best crews book out fastest in spring and early summer. South Carolina weather drives material choices here, so ask contractors what they install most often in Myrtle Beach and why.

Do I need a permit for electrical panel upgrade in Myrtle Beach, South Carolina?

Most Myrtle Beach, SC projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Myrtle Beach?

Get at least three written quotes from licensed, insured South Carolina contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Myrtle Beach metro market.

How much does a 200 amp panel upgrade cost?

$2,000 to $4,500 typically, or $2,800 to $6,000 if the meter base and service entrance also need replacing.

How long does a panel upgrade take?

One day for the electrical work, with power out four to eight hours. Utility scheduling and inspection may spread it over a few days.

Do I need 200 amps for an EV charger?

Usually. A Level 2 charger draws 40 to 60 amps; most 100 amp services cannot support it without load management.

Is a permit required?

Always. The utility will not reconnect without an inspection sign-off, and unpermitted work surfaces during a home sale.

What are Federal Pacific and Zinsco panels?

Obsolete panels with breakers that fail to trip. Insurers often refuse coverage and replacement is strongly recommended regardless of capacity.

Can I just add a subpanel instead?

A subpanel adds circuit space, not capacity. If your total service is maxed out, you still need the main upgrade.

Home/Cost guides/Electrical Panel Upgrade/Myrtle Beach, SC

Myrtle Beach metro · South Carolina

Electrical Panel Upgrade cost in Myrtle Beach, SC

Myrtle Beach homeowners typically pay $1,750 – $4,300 for electrical panel upgrade. Local labor and materials price 4% below the national average.

Get my Myrtle Beach estimate Use the Myrtle Beach calculator

Myrtle Beach average

$2,800

Typical low

$1,750

Typical high

$4,300

Per panel

$1,250 – $5,750

Sample ZIP

What drives Myrtle Beach pricing

Local labor

Licensed trade labor in Myrtle Beach runs about 96% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Myrtle Beach, SC projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

South Carolina weather drives material choices here, so ask contractors what they install most often in Myrtle Beach and why.

Instant cost calculator

Adjust the inputs to see live pricing

Panels to upgrade1 panel

Target service size

Service entrance

Panel location

Code corrections

Estimated project cost

$1,250 – $2,400

Most homeowners pay around $1,825

Compare target service size

Cost by material in Myrtle Beach

Installed Myrtle Beach pricing per panel.

Option	Installed cost	Pros	Cons
100 amp service	$1,250 – $2,400	Fine for small homes with gas heat	No headroom for EV or heat pump
150 amp service	$1,750 – $3,050	Middle ground	Often costs nearly the same as 200
200 amp service	$1,900 – $4,300	The modern standard, supports EV and electrification	May require new meter base
400 amp service	$3,850 – $8,650	Large homes, shops, multiple EVs	Utility coordination and two panels
Subpanel	$575 – $1,900	Cheap way to add circuits	Does not increase total service capacity

Where the money goes in Myrtle Beach

A typical $2,800 Myrtle Beach project, broken down by line item.

Labor48% · $1,344
Panel and breakers27% · $756
Service entrance materials15% · $420
Permits and inspection10% · $280

Common add-ons

Extras that show up on Myrtle Beach quotes but rarely in the headline price.

EV charger circuit

$480 – $1,900

Whole-home surge protector

$240 – $670

Generator interlock or transfer switch

$385 – $2,400

Grounding rod system update

$190 – $770

AFCI/GFCI breaker upgrades

Per breaker

$38 – $115

Ways to save in Myrtle Beach

Go straight to 200 amp — the incremental cost over 150 is small and you will not repeat the job.
Bundle EV charger, surge protector and any new circuits into the same permit and visit.
Check for utility and federal electrification rebates before you sign.
Get three bids; panel pricing varies more between electricians than almost any other trade.
Ask about keeping the panel in its existing location to avoid relocation cost.

Myrtle Beach FAQs

Get a Myrtle Beach price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your SC ZIP code — then connect you with vetted local pros.

Get electrician quotes