How much does epoxy garage floor coating cost in Knoxville, TN?

Most Knoxville homeowners spend between $1,700 – $5,100 on epoxy garage floor coating, with an average around $3,400. Local labor prices 6% below the national average, so Knoxville quotes tend to land at the lower end of national ranges.

Why is epoxy garage floor coating more or less expensive in Knoxville than elsewhere?

Licensed trade labor in Knoxville runs about 94% of the national average, and the best crews book out fastest in spring and early summer. Tennessee weather drives material choices here, so ask contractors what they install most often in Knoxville and why.

Do I need a permit for epoxy garage floor coating in Knoxville, Tennessee?

Most Knoxville, TN projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Knoxville?

Get at least three written quotes from licensed, insured Tennessee contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Knoxville metro market.

How much does epoxy garage floor coating cost in 2026?

Most homeowners pay between $1,800 and $5,400, with a national average near $3,600. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per square foot?

Installed pricing usually runs $4.00 to $12.00 per square foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-square foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Epoxy Garage Floor Coating/Knoxville, TN

Knoxville metro · Tennessee

Epoxy Garage Floor Coating cost in Knoxville, TN

Knoxville homeowners typically pay $1,700 – $5,100 for epoxy garage floor coating. Local labor and materials price 6% below the national average.

Get my Knoxville estimate Use the Knoxville calculator

Knoxville average

$3,400

Typical low

$1,700

Typical high

$5,100

Per square foot

$4 – $11

Sample ZIP

What drives Knoxville pricing

Local labor

Licensed trade labor in Knoxville runs about 94% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Knoxville, TN projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Tennessee weather drives material choices here, so ask contractors what they install most often in Knoxville and why.

Instant cost calculator

Adjust the inputs to see live pricing

Floor area (sq ft)450 square feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$1,992 – $2,732

Most homeowners pay around $2,362

Compare quality / material level

Cost by material in Knoxville

Installed Knoxville pricing per square foot.

Option	Installed cost	Pros	Cons
DIY-grade roll-on epoxy	$5 – $6	—	—
Standard flake epoxy	$6 – $8	—	—
Full-flake with polyurethane topcoat	$8 – $11	—	—
Polyaspartic one-day system	$11 – $15	—	—

Where the money goes in Knoxville

A typical $3,400 Knoxville project, broken down by line item.

Labor0.45% · $15
Materials0.38% · $13
Permits & inspections0.05% · $2
Overhead & profit0.12% · $4

Common add-ons

Extras that show up on Knoxville quotes but rarely in the headline price.

Crack and pit repair

$140 – $750

Moisture testing

$140 – $375

Diamond grinding prep

$1 – $3

Anti-slip additive

$94 – $375

Ways to save in Knoxville

Choose a single-color system over full-flake to cut material cost.
Coat during mild weather — cold slabs slow cure and add labor.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Knoxville FAQs

Get a Knoxville price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your TN ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Knoxville research

Best epoxy garage floor coating companies in Knoxville Epoxy Garage Floor Coating permits in Tennessee Epoxy Garage Floor Coating near me All Tennessee prices

More Tennessee cities

Nashville Memphis Chattanooga Franklin Murfreesboro

Other project costs in Knoxville

Fence Installation in Knoxville

$1,410 – $3,760

Roof Replacement in Knoxville

$7,990 – $31,960

Kitchen Remodel in Knoxville

$16,920 – $89,300

HVAC Replacement in Knoxville

$5,170 – $16,920

Deck Building in Knoxville

$4,136 – $11,280

Window Replacement in Knoxville

$423 – $1,410

See every Knoxville cost guide