How much does fence installation cost in Irving, TX?

Most Irving homeowners spend between $1,500 – $4,000 on fence installation, with an average around $2,550. Local labor prices right at the national average, so Irving quotes tend to land at the higher end of national ranges.

Why is fence installation more or less expensive in Irving than elsewhere?

Irving quotes track the DFW average closely. Hail and wind events drive periodic roof replacement.

Do I need a permit for fence installation in Irving, Texas?

City permits apply to most exterior and mechanical work. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Irving?

Get at least three written quotes from licensed, insured Texas contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Dallas-Fort Worth market.

How much does a fence cost per foot?

Installed fencing runs $1 to $45 per linear foot. Wire and electric fencing sit at $1 to $6, wood and privacy at $10 to $20, and vinyl, aluminum, wrought iron and composite at $20 to $45.

How much does it cost to fence a typical backyard?

Most residential backyards have a 150 to 170 linear foot perimeter, which puts a wood fence at roughly $1,500 to $3,000 and a vinyl or composite fence at $3,500 to $7,000.

What is the cheapest fence to install?

Barbed wire, electric and woven wire at $1 to $6 per foot are cheapest, followed by chain link starting near $5 per foot.

Do I need a permit to build a fence?

Most cities require a permit for fences above 6 feet, and many require one for any fence. Permits typically cost $20 to $400 and HOAs often add their own approval step.

How long does a fence installation take?

A standard 150-foot residential fence takes a two-person crew one to three days, plus 24 to 48 hours for post concrete to cure before panels go on.

Does a fence add value to a home?

A well-built fence typically returns 50% to 70% of its cost at resale and matters most for homes marketed to families with kids or pets.

Home/Cost guides/Fence Installation/Irving, TX

Dallas-Fort Worth · Texas

Fence Installation cost in Irving, TX

Irving homeowners typically pay $1,500 – $4,000 for fence installation. Local labor and materials price right at the national average.

Get my Irving estimate Use the Irving calculator

Irving average

$2,550

Typical low

$1,500

Typical high

$4,000

Per linear foot

$1 – $45

Sample ZIP

75038

What drives Irving pricing

Local labor

Irving quotes track the DFW average closely.

Permits & code

City permits apply to most exterior and mechanical work.

Climate & conditions

Hail and wind events drive periodic roof replacement.

Instant cost calculator

Adjust the inputs to see live pricing

Fence length160 linear feet

Fence material

Fence height

Terrain

Old fence removal

Gates

Estimated project cost

$136 – $816

Most homeowners pay around $476

Compare fence material

Cost by material in Irving

Installed Irving pricing per linear foot.

Option	Installed cost	Pros	Cons
Barbed wire	$1 – $6	Secure, inexpensive, ideal for farmland and ranches.	Dangerous around kids and pricey once you add accessories.
Electric / invisible	$1 – $6	Invisible from the street, keeps pets contained.	No physical barrier and needs training plus power.
Woven wire	$2 – $4	Strong and safe for horses, goats and sheep.	More complex to install than plain wire.
Metal chain link	$5 – $40	Durable, affordable and effective.	Least attractive option and can rust.
Wood & privacy	$10 – $20	Inexpensive and long-lasting with proper treatment.	Needs regular staining and upkeep.
Composite & Trex	$15 – $45	Looks like wood with almost no maintenance.	Highest upfront material cost.
Vinyl / PVC	$20 – $25	Lightweight, durable and easy to install.	Can be cut through, so weak for security.
Aluminum or steel	$20 – $30	Will not rust and needs little upkeep.	Not the most secure metal option.
Wrought iron	$20 – $35	Can last a lifetime and looks traditional.	One of the most expensive options.
Brick, stone or block	$30 – $60	Maximum privacy, noise blocking and curb appeal.	Needs footings and often an engineered permit.

Where the money goes in Irving

A typical $2,550 Irving project, broken down by line item.

Materials55% · $1,403
Labor35% · $893
Prep, permits & disposal10% · $255

Common add-ons

Extras that show up on Irving quotes but rarely in the headline price.

Walk gate (per gate)

$150 – $700

Driveway or double gate

$400 – $3,000

Automatic gate opener

$800 – $4,500

Old fence removal & haul-off

Per linear foot

$3 – $5

Property survey

$350 – $900

Building permit

$20 – $400

Stain or seal wood fence

Per linear foot

$2 – $6

Post-hole drilling in rock

Per post surcharge

$8 – $20

Ways to save in Irving

Get three bids: fence pricing spreads 20–40% between contractors in the same ZIP.
Build in the off-season (late fall or winter) when crews are hungry for work.
Share the cost with a neighbor on a shared property line — many split 50/50.
Keep the run straight and simple; every corner, gate and grade change adds labor.
Choose 4-foot picket instead of 6-foot privacy where privacy is not needed to cut roughly 15%.
Do the demo and brush clearing yourself to save $3 to $5 per foot.
Buy the material yourself only if the pro allows it — most get volume discounts you cannot match.

Irving FAQs

Get a Irving price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your TX ZIP code — then connect you with vetted local pros.

Get fence quotes

More Irving research

Best fence installation companies in Irving Fence Installation permits in Texas Fence Installation near me All Texas prices

Fence Installation cost near Irving

Fence Installation cost in Dallas, TX

$1,530 – $4,080

Fence Installation cost in Fort Worth, TX

$1,500 – $4,000

Fence Installation cost in Plano, TX

$1,575 – $4,200

Fence Installation cost in Frisco, TX

$1,590 – $4,240

Fence Installation cost in Arlington, TX

$1,485 – $3,960

Fence Installation cost in McKinney, TX

$1,560 – $4,160

More Texas cities

Denton Garland Houston Katy Sugar Land The Woodlands Pearland Pasadena

Other project costs in Irving

Roof Replacement in Irving

$8,500 – $34,000

Kitchen Remodel in Irving

$18,000 – $95,000

HVAC Replacement in Irving

$5,500 – $18,000

Deck Building in Irving

$4,400 – $12,000

Window Replacement in Irving

$450 – $1,500

Bathroom Remodel in Irving

$6,500 – $38,000

See every Irving cost guide