Fence Installation cost in Richmond Hill, ON
Richmond Hill homeowners typically pay $2,050 – $5,500 for fence installation. Local labor and materials price 37% above the national average.
Richmond Hill average
$3,500
Typical low
$2,050
Typical high
$5,500
Per linear foot
$1 – $62
Sample ZIP
L4C
What drives Richmond Hill pricing
Local labor
Skilled trades across Richmond Hill are unionised or association-backed, and GTA labour rates run well above the North American average — expect quotes in Canadian dollars roughly 37% higher than the US benchmark once exchange and local wages are factored in. Winter shuts down much exterior work, so the spring-to-fall window is the busiest and priciest.
Permits & code
Richmond Hill issues building permits through its municipal building department under the Ontario Building Code. Electrical work needs an ESA (Electrical Safety Authority) notification and inspection, gas work must be done by a TSSA-certified installer, and HVAC changes should be sized by an HRAI-trained contractor. New-home and major-renovation work may fall under Tarion warranty coverage, and lots near a river or ravine can require Conservation Authority approval before the city will issue a permit.
Climate & conditions
Richmond Hill has a cold continental climate with freeze-thaw cycles, heavy snow load and humid summers. Expect frost-depth footings, ice-and-water shielding on roofs, insulation upgrades to meet Ontario energy requirements, and exterior work scheduled between April and November.
Instant cost calculator
Adjust the inputs to see live pricing
Estimated project cost
$186 – $1,118
Most homeowners pay around $652
Compare fence material
Cost by material in Richmond Hill
Installed Richmond Hill pricing per linear foot.
| Option | Installed cost |
|---|---|
| Barbed wire | $1 – $8 |
| Electric / invisible | $1 – $8 |
| Woven wire | $3 – $5 |
| Metal chain link | $7 – $55 |
| Wood & privacy | $14 – $27 |
| Composite & Trex | $21 – $62 |
| Vinyl / PVC | $27 – $34 |
| Aluminum or steel | $27 – $41 |
| Wrought iron | $27 – $48 |
| Brick, stone or block | $41 – $82 |
Where the money goes in Richmond Hill
A typical $3,500 Richmond Hill project, broken down by line item.
- Materials55% · $1,925
- Labor35% · $1,225
- Prep, permits & disposal10% · $350
Common add-ons
Extras that show up on Richmond Hill quotes but rarely in the headline price.
Walk gate (per gate)
Driveway or double gate
Automatic gate opener
Old fence removal & haul-off
Per linear foot
Property survey
Building permit
Stain or seal wood fence
Per linear foot
Post-hole drilling in rock
Per post surcharge
Ways to save in Richmond Hill
- Get three bids: fence pricing spreads 20–40% between contractors in the same ZIP.
- Build in the off-season (late fall or winter) when crews are hungry for work.
- Share the cost with a neighbor on a shared property line — many split 50/50.
- Keep the run straight and simple; every corner, gate and grade change adds labor.
- Choose 4-foot picket instead of 6-foot privacy where privacy is not needed to cut roughly 15%.
- Do the demo and brush clearing yourself to save $3 to $5 per foot.
- Buy the material yourself only if the pro allows it — most get volume discounts you cannot match.
Richmond Hill FAQs
Get a Richmond Hill price you can budget against
Answer a few questions about your project and we'll model a low, average and premium price for your ON ZIP code — then connect you with vetted local pros.
Get fence quotesMore Richmond Hill research
Fence Installation cost near Richmond Hill
Fence Installation cost in Mississauga, ON
$2,035 – $5,460
Fence Installation cost in Uxbridge, ON
$1,915 – $5,139
Fence Installation cost in Scugog, ON
$1,900 – $5,099
Fence Installation cost in Brock, ON
$1,870 – $5,018
Fence Installation cost in East Gwillimbury, ON
$1,945 – $5,219
Fence Installation cost in Whitchurch-Stouffville, ON
$1,990 – $5,339