Fence Installation cost in Winston-Salem, NC
Winston-Salem homeowners typically pay $1,400 – $3,750 for fence installation. Local labor and materials price 6% below the national average.
Winston-Salem average
$2,400
Typical low
$1,400
Typical high
$3,750
Per linear foot
$1 – $42
Sample ZIP
What drives Winston-Salem pricing
Local labor
Licensed trade labor in Winston-Salem runs about 94% of the national average, and the best crews book out fastest in spring and early summer.
Permits & code
Most Winston-Salem, NC projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.
Climate & conditions
North Carolina weather drives material choices here, so ask contractors what they install most often in Winston-Salem and why.
Instant cost calculator
Adjust the inputs to see live pricing
Estimated project cost
$128 – $767
Most homeowners pay around $447
Compare fence material
Cost by material in Winston-Salem
Installed Winston-Salem pricing per linear foot.
| Option | Installed cost |
|---|---|
| Barbed wire | $1 – $6 |
| Electric / invisible | $1 – $6 |
| Woven wire | $2 – $4 |
| Metal chain link | $5 – $38 |
| Wood & privacy | $9 – $19 |
| Composite & Trex | $14 – $42 |
| Vinyl / PVC | $19 – $24 |
| Aluminum or steel | $19 – $28 |
| Wrought iron | $19 – $33 |
| Brick, stone or block | $28 – $56 |
Where the money goes in Winston-Salem
A typical $2,400 Winston-Salem project, broken down by line item.
- Materials55% · $1,320
- Labor35% · $840
- Prep, permits & disposal10% · $240
Common add-ons
Extras that show up on Winston-Salem quotes but rarely in the headline price.
Walk gate (per gate)
Driveway or double gate
Automatic gate opener
Old fence removal & haul-off
Per linear foot
Property survey
Building permit
Stain or seal wood fence
Per linear foot
Post-hole drilling in rock
Per post surcharge
Ways to save in Winston-Salem
- Get three bids: fence pricing spreads 20–40% between contractors in the same ZIP.
- Build in the off-season (late fall or winter) when crews are hungry for work.
- Share the cost with a neighbor on a shared property line — many split 50/50.
- Keep the run straight and simple; every corner, gate and grade change adds labor.
- Choose 4-foot picket instead of 6-foot privacy where privacy is not needed to cut roughly 15%.
- Do the demo and brush clearing yourself to save $3 to $5 per foot.
- Buy the material yourself only if the pro allows it — most get volume discounts you cannot match.
Winston-Salem FAQs
Get a Winston-Salem price you can budget against
Answer a few questions about your project and we'll model a low, average and premium price for your NC ZIP code — then connect you with vetted local pros.
Get fence quotes