How much does gutter cleaning cost in 2026?

Most homeowners pay between $180 and $450, with a national average near $315. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per linear foot?

Installed pricing usually runs $1.00 to $2.50 per linear foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-linear foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

When is the cheapest time to book?

Off-season and shoulder months. Booking outside the spring–summer rush, and staying flexible on start dates, commonly saves 5–15% because crews are filling calendar gaps.

Yes. Contractor financing, a home equity line, or a 0% promotional card are all common. Compare the total interest cost against paying cash — promotional financing is sometimes priced into a higher bid.

How do I avoid getting overcharged?

Get the scope in writing with materials by brand and model, quantities, exclusions, permit responsibility, payment schedule and warranty. Never pay more than one third up front, and never pay in full before the final inspection.

How often should gutters be cleaned?

Twice a year in most homes, quarterly under heavy tree cover. Clogged gutters are a leading cause of foundation and fascia damage.

Are gutter guards worth it?

They reduce cleaning frequency but do not eliminate it. At $4–$12 per foot installed, they pay back over 5–10 years for tall or tree-heavy homes.

Home/Cost guides/Gutter Cleaning

Construction

How much does gutter cleaning cost?

Q: How much does gutter cleaning cost?

Most homes pay $180–$450, or roughly $1–$2.50 per linear foot. Three-story homes cost the most because of access.

Gutter Cleaning costs $180 to $450 for a typical project, averaging about $315. Installed pricing usually runs $1.00 to $2.50 per linear foot, and scope, materials, access and local labor rates explain nearly all of the variation.

Get my personalized estimate Use the calculator

National average

$315

Typical low

$180

Typical high

$450

Per linear foot

$1 – $3

Instant cost calculator

Adjust the inputs to see live pricing

Gutter length (linear feet)180 linear feet

Quality / material level

Site access

Removal / prep work

Timing

Region

Estimated project cost

$214 – $293

Most homeowners pay around $254

Compare quality / material level

Cost by material

Installed pricing per linear foot.

Option	Installed cost	Pros	Cons
Single story	$1 – $1	—	—
Two story	$1 – $2	—	—
Three story or steep roof	$2 – $3	—	—
Cleaning with minor repairs	$3 – $4	—	—

Gutter Cleaning cost by project size

Typical installed pricing before local adjustments.

Project size	Budget	Average	Premium
90 linear foots	$90	$158	$225
180 linear foots	$180	$315	$450
270 linear foots	$270	$473	$675
360 linear foots	$360	$630	$900

Gutter Cleaning cost by material or quality level

Option	Price range	Best for
Single story	$1.09 – $1.49 / linear foot	Lowest upfront cost, shortest lifespan
Two story	$1.49 – $1.96 / linear foot	Best overall value for most homes
Three story or steep roof	$1.96 – $2.54 / linear foot	Longer warranty and better finish
Cleaning with minor repairs	$2.54 – $3.50 / linear foot	Top-tier materials and custom detailing

Where the money goes

A typical project budget, broken down by line item.

Labor0.45% · $1
Materials0.38% · $1
Permits & inspections0.05% · $0
Overhead & profit0.12% · $0

Cost by region

Labor markets move the number more than any other single factor.

Northeast

$207 – $518

+15% vs. national average

West

$212 – $531

+18% vs. national average

Midwest

$173 – $432

-4% vs. national average

South

$169 – $423

-6% vs. national average

Common add-ons

Line items that show up on most quotes but rarely in the headline price.

Downspout flushing

$50 – $150

Gutter guard installation

$4 – $12

Minor resealing

$75 – $300

Roof debris blow-off

$75 – $250

DIY vs. hiring a pro

Hire a pro

$180 – $450

Do it yourself

$81 – $248

DIY saves labor but not materials, permits or rework. Only take it on if the job does not require a licensed trade or inspection.

Ways to save

Practical levers that lower the bill without cutting quality.

Schedule twice yearly and prepay for a small discount.
Install guards on tree-shaded runs only, not the whole house.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Questions to ask your contractor

01Are you licensed and insured in my city, and can I see the certificate?
02Is this a fixed-price bid or an estimate that can change?
03What exactly is excluded from the quote?
04Who pulls the permit and who schedules inspections?
05What is the written workmanship warranty and how long does it last?
06What is the payment schedule, and how much is due up front?
07How long will the work take, and what could delay it?

Frequently asked questions

Ready for a number you can budget against?

Answer a few questions about your project and we'll model a low, average and premium price for your ZIP code — then connect you with vetted pros.

Get free quotes from certified pros

Gutter Cleaning cost by city

Local labor rates, permits and climate change the number. Pick your city for prices near you.

Gutter Cleaning cost in Los Angeles, CA

$223 – $558

Gutter Cleaning cost in San Diego, CA

$212 – $531

Gutter Cleaning cost in San Jose, CA

$248 – $621

Gutter Cleaning cost in San Francisco, CA

$261 – $653

Gutter Cleaning cost in Oakland, CA

$238 – $594

Gutter Cleaning cost in Sacramento, CA

$194 – $486

Gutter Cleaning cost in Fresno, CA

$176 – $441

Gutter Cleaning cost in Long Beach, CA

$220 – $549

Gutter Cleaning cost in Anaheim, CA

$216 – $540

Gutter Cleaning cost in Santa Ana, CA

$214 – $536

Gutter Cleaning cost in Irvine, CA

$227 – $567

Gutter Cleaning cost in Riverside, CA

$191 – $477

Gutter Cleaning cost in San Bernardino, CA

$185 – $464

Gutter Cleaning cost in Bakersfield, CA

$175 – $437

Gutter Cleaning cost in Stockton, CA

$184 – $459

Gutter Cleaning cost in Modesto, CA

$180 – $450

Gutter Cleaning cost in Chula Vista, CA

$207 – $518

Gutter Cleaning cost in Fremont, CA

$243 – $608

Gutter Cleaning cost in Pasadena, CA

$230 – $576

Gutter Cleaning cost in Glendale, CA

$225 – $563

Gutter Cleaning cost in Santa Clarita, CA

$209 – $522

Gutter Cleaning cost in Torrance, CA

$221 – $554

Gutter Cleaning cost in Oxnard, CA

$205 – $513

Gutter Cleaning cost in San Mateo, CA

$252 – $630

See all cities