How much does hardwood floor refinishing cost in Sioux Falls, SD?

Most Sioux Falls homeowners spend between $2,200 – $5,900 on hardwood floor refinishing, with an average around $4,050. Local labor prices 8% below the national average, so Sioux Falls quotes tend to land at the lower end of national ranges.

Why is hardwood floor refinishing more or less expensive in Sioux Falls than elsewhere?

Licensed trade labor in Sioux Falls runs about 92% of the national average, and the best crews book out fastest in spring and early summer. South Dakota weather drives material choices here, so ask contractors what they install most often in Sioux Falls and why.

Do I need a permit for hardwood floor refinishing in Sioux Falls, South Dakota?

Most Sioux Falls, SD projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Sioux Falls?

Get at least three written quotes from licensed, insured South Dakota contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Sioux Falls metro market.

How much does hardwood floor refinishing cost in 2026?

Most homeowners pay between $2,400 and $6,400, with a national average near $4,400. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per square foot?

Installed pricing usually runs $3.00 to $8.00 per square foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-square foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Hardwood Floor Refinishing/Sioux Falls, SD

Sioux Falls metro · South Dakota

Hardwood Floor Refinishing cost in Sioux Falls, SD

Sioux Falls homeowners typically pay $2,200 – $5,900 for hardwood floor refinishing. Local labor and materials price 8% below the national average.

Get my Sioux Falls estimate Use the Sioux Falls calculator

Sioux Falls average

$4,050

Typical low

$2,200

Typical high

$5,900

Per square foot

$3 – $7

Sample ZIP

What drives Sioux Falls pricing

Local labor

Licensed trade labor in Sioux Falls runs about 92% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Sioux Falls, SD projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

South Dakota weather drives material choices here, so ask contractors what they install most often in Sioux Falls and why.

Instant cost calculator

Adjust the inputs to see live pricing

Floor area (sq ft)800 square feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$2,386 – $3,276

Most homeowners pay around $2,831

Compare quality / material level

Cost by material in Sioux Falls

Installed Sioux Falls pricing per square foot.

Option	Installed cost	Pros	Cons
Buff and recoat	$3 – $4	—	—
Standard sand and finish	$4 – $6	—	—
Sand with stain change	$6 – $7	—	—
Dustless with premium water-based finish	$7 – $10	—	—

Where the money goes in Sioux Falls

A typical $4,050 Sioux Falls project, broken down by line item.

Labor0.45% · $18
Materials0.38% · $15
Permits & inspections0.05% · $2
Overhead & profit0.12% · $5

Common add-ons

Extras that show up on Sioux Falls quotes but rarely in the headline price.

Board replacement

$7 – $18

Stair refinishing

$37 – $110

Trim and shoe molding

$2 – $6

Furniture moving

$140 – $460

Ways to save in Sioux Falls

Recoat every few years instead of waiting for a full sand.
Do rooms in phases to stay in the house and avoid hotel costs.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Sioux Falls FAQs

Get a Sioux Falls price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your SD ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Sioux Falls research

Best hardwood floor refinishing companies in Sioux Falls Hardwood Floor Refinishing permits in South Dakota Hardwood Floor Refinishing near me All South Dakota prices

More South Dakota cities

Rapid City Aberdeen

Other project costs in Sioux Falls

Fence Installation in Sioux Falls

$1,380 – $3,680

Roof Replacement in Sioux Falls

$7,820 – $31,280

Kitchen Remodel in Sioux Falls

$16,560 – $87,400

HVAC Replacement in Sioux Falls

$5,060 – $16,560

Deck Building in Sioux Falls

$4,048 – $11,040

Window Replacement in Sioux Falls

$414 – $1,380

See every Sioux Falls cost guide