How much does patio installation cost in 2026?

Most homeowners pay between $3,000 and $9,000, with a national average near $6,000. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per square foot?

Installed pricing usually runs $10.00 to $30.00 per square foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-square foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

When is the cheapest time to book?

Off-season and shoulder months. Booking outside the spring–summer rush, and staying flexible on start dates, commonly saves 5–15% because crews are filling calendar gaps.

Yes. Contractor financing, a home equity line, or a 0% promotional card are all common. Compare the total interest cost against paying cash — promotional financing is sometimes priced into a higher bid.

How do I avoid getting overcharged?

Get the scope in writing with materials by brand and model, quantities, exclusions, permit responsibility, payment schedule and warranty. Never pay more than one third up front, and never pay in full before the final inspection.

What is the cheapest patio material?

Poured concrete at $10–$16 per square foot. Pavers run $14–$26 and natural stone $20–$40, but pavers can be lifted and reset if they settle.

Do patios need permits?

Ground-level patios usually do not, but roofs, walls, gas lines and anything over about 30 inches high typically do.

How long does a patio take to build?

Two to five days for concrete plus a week of curing; paver patios take three to seven days and are usable immediately.

Home/Cost guides/Patio Installation

Construction

How much does patio installation cost?

Patio Installation costs $3,000 to $9,000 for a typical project, averaging about $6,000. Installed pricing usually runs $10.00 to $30.00 per square foot, and scope, materials, access and local labor rates explain nearly all of the variation.

Get my personalized estimate Use the calculator

National average

$6,000

Typical low

$3,000

Typical high

$9,000

Per square foot

$10 – $30

Instant cost calculator

Adjust the inputs to see live pricing

Patio area (sq ft)300 square feet

Quality / material level

Site access

Removal / prep work

Timing

Region

Estimated project cost

$4,064 – $5,572

Most homeowners pay around $4,818

Compare quality / material level

Cost by material

Installed pricing per square foot.

Option	Installed cost	Pros	Cons
Poured concrete	$12 – $17	—	—
Stamped concrete	$17 – $22	—	—
Concrete pavers	$22 – $29	—	—
Natural stone / travertine	$29 – $40	—	—

Patio Installation cost by project size

Typical installed pricing before local adjustments.

Project size	Budget	Average	Premium
150 square foots	$1,500	$3,000	$4,500
300 square foots	$3,000	$6,000	$9,000
450 square foots	$4,500	$9,000	$13,500
600 square foots	$6,000	$12,000	$18,000

Patio Installation cost by material or quality level

Option	Price range	Best for
Poured concrete	$12.40 – $17.00 / square foot	Lowest upfront cost, shortest lifespan
Stamped concrete	$17.00 – $22.40 / square foot	Best overall value for most homes
Concrete pavers	$22.40 – $29.00 / square foot	Longer warranty and better finish
Natural stone / travertine	$29.00 – $40.00 / square foot	Top-tier materials and custom detailing

Where the money goes

A typical project budget, broken down by line item.

Labor0.45% · $27
Materials0.38% · $23
Permits & inspections0.05% · $3
Overhead & profit0.12% · $7

Cost by region

Labor markets move the number more than any other single factor.

Northeast

$3,450 – $10,350

+15% vs. national average

West

$3,540 – $10,620

+18% vs. national average

Midwest

$2,880 – $8,640

-4% vs. national average

South

$2,820 – $8,460

-6% vs. national average

Common add-ons

Line items that show up on most quotes but rarely in the headline price.

Fire pit

$600 – $3,000

Seating wall

$1,500 – $6,000

Pergola

$2,500 – $9,000

Drainage and grading

$500 – $2,500

DIY vs. hiring a pro

Hire a pro

$3,000 – $9,000

Do it yourself

$1,350 – $4,950

DIY saves labor but not materials, permits or rework. Only take it on if the job does not require a licensed trade or inspection.

Ways to save

Practical levers that lower the bill without cutting quality.

Pour a simple broom-finish slab and upgrade with furniture instead of stamping.
Combine patio and walkway work in one mobilization.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Questions to ask your contractor

01Are you licensed and insured in my city, and can I see the certificate?
02Is this a fixed-price bid or an estimate that can change?
03What exactly is excluded from the quote?
04Who pulls the permit and who schedules inspections?
05What is the written workmanship warranty and how long does it last?
06What is the payment schedule, and how much is due up front?
07How long will the work take, and what could delay it?

Frequently asked questions

Ready for a number you can budget against?

Answer a few questions about your project and we'll model a low, average and premium price for your ZIP code — then connect you with vetted pros.

Get free quotes from certified pros

Patio Installation cost by city

Local labor rates, permits and climate change the number. Pick your city for prices near you.

Patio Installation cost in Los Angeles, CA

$3,720 – $11,160

Patio Installation cost in San Diego, CA

$3,540 – $10,620

Patio Installation cost in San Jose, CA

$4,140 – $12,420

Patio Installation cost in San Francisco, CA

$4,350 – $13,050

Patio Installation cost in Oakland, CA

$3,960 – $11,880

Patio Installation cost in Sacramento, CA

$3,240 – $9,720

Patio Installation cost in Fresno, CA

$2,940 – $8,820

Patio Installation cost in Long Beach, CA

$3,660 – $10,980

Patio Installation cost in Anaheim, CA

$3,600 – $10,800

Patio Installation cost in Santa Ana, CA

$3,570 – $10,710

Patio Installation cost in Irvine, CA

$3,780 – $11,340

Patio Installation cost in Riverside, CA

$3,180 – $9,540

Patio Installation cost in San Bernardino, CA

$3,090 – $9,270

Patio Installation cost in Bakersfield, CA

$2,910 – $8,730

Patio Installation cost in Stockton, CA

$3,060 – $9,180

Patio Installation cost in Modesto, CA

$3,000 – $9,000

Patio Installation cost in Chula Vista, CA

$3,450 – $10,350

Patio Installation cost in Fremont, CA

$4,050 – $12,150

Patio Installation cost in Pasadena, CA

$3,840 – $11,520

Patio Installation cost in Glendale, CA

$3,750 – $11,250

Patio Installation cost in Santa Clarita, CA

$3,480 – $10,440

Patio Installation cost in Torrance, CA

$3,690 – $11,070

Patio Installation cost in Oxnard, CA

$3,420 – $10,260

Patio Installation cost in San Mateo, CA

$4,200 – $12,600

See all cities