How much does radon mitigation cost in Arlington, VA?

Most Arlington homeowners spend between $1,100 – $3,000 on radon mitigation, with an average around $2,050. Local labor prices 20% above the national average, so Arlington quotes tend to land at the higher end of national ranges.

Why is radon mitigation more or less expensive in Arlington than elsewhere?

Licensed trade labor in Arlington runs about 120% of the national average, and the best crews book out fastest in spring and early summer. Virginia weather drives material choices here, so ask contractors what they install most often in Arlington and why.

Do I need a permit for radon mitigation in Arlington, Virginia?

Most Arlington, VA projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Arlington?

Get at least three written quotes from licensed, insured Virginia contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Arlington metro market.

How much does radon mitigation cost in 2026?

Most homeowners pay between $900 and $2,500, with a national average near $1,700. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per system?

Installed pricing usually runs $900.00 to $2,500.00 per system, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-system price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Radon Mitigation/Arlington, VA

Arlington metro · Virginia

Radon Mitigation cost in Arlington, VA

Arlington homeowners typically pay $1,100 – $3,000 for radon mitigation. Local labor and materials price 20% above the national average.

Get my Arlington estimate Use the Arlington calculator

Arlington average

$2,050

Typical low

$1,100

Typical high

$3,000

Per system

$1,100 – $3,000

Sample ZIP

What drives Arlington pricing

Local labor

Licensed trade labor in Arlington runs about 120% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Arlington, VA projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Virginia weather drives material choices here, so ask contractors what they install most often in Arlington and why.

Instant cost calculator

Adjust the inputs to see live pricing

Number of suction points1 system

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$1,188 – $1,663

Most homeowners pay around $1,425

Compare quality / material level

Cost by material in Arlington

Installed Arlington pricing per system.

Option	Installed cost	Pros	Cons
Single-point sub-slab system	$1,250 – $1,750	—	—
Sub-slab with sealing	$1,750 – $2,300	—	—
Crawlspace membrane system	$2,300 – $2,950	—	—
Multi-point system with monitoring	$2,950 – $4,100	—	—

Where the money goes in Arlington

A typical $2,050 Arlington project, broken down by line item.

Labor0.45% · $9
Materials0.38% · $8
Permits & inspections0.05% · $1
Overhead & profit0.12% · $2

Common add-ons

Extras that show up on Arlington quotes but rarely in the headline price.

Post-mitigation testing

$180 – $360

Crawlspace vapor barrier

$1,800 – $6,000

Sump pit sealing

$240 – $960

Continuous radon monitor

$180 – $480

Ways to save in Arlington

Test first with a $20 kit before commissioning a system.
Route the pipe on the least visible elevation to skip cosmetic upgrades.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Arlington FAQs

Get a Arlington price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your VA ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Arlington research

Best radon mitigation companies in Arlington Radon Mitigation permits in Virginia Radon Mitigation near me All Virginia prices

More Virginia cities

Virginia Beach Richmond Alexandria Norfolk Chesapeake Roanoke

Other project costs in Arlington

Fence Installation in Arlington

$1,800 – $4,800

Roof Replacement in Arlington

$10,200 – $40,800

Kitchen Remodel in Arlington

$21,600 – $114,000

HVAC Replacement in Arlington

$6,600 – $21,600

Deck Building in Arlington

$5,280 – $14,400

Window Replacement in Arlington

$540 – $1,800

See every Arlington cost guide