How much does radon mitigation cost in St. Paul, MN?

Most St. Paul homeowners spend between $955 – $2,650 on radon mitigation, with an average around $1,800. Local labor prices 6% above the national average, so St. Paul quotes tend to land at the higher end of national ranges.

Why is radon mitigation more or less expensive in St. Paul than elsewhere?

Licensed trade labor in St. Paul runs about 106% of the national average, and the best crews book out fastest in spring and early summer. Minnesota weather drives material choices here, so ask contractors what they install most often in St. Paul and why.

Do I need a permit for radon mitigation in St. Paul, Minnesota?

Most St. Paul, MN projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in St. Paul?

Get at least three written quotes from licensed, insured Minnesota contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the St. Paul metro market.

How much does radon mitigation cost in 2026?

Most homeowners pay between $900 and $2,500, with a national average near $1,700. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per system?

Installed pricing usually runs $900.00 to $2,500.00 per system, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-system price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Radon Mitigation/St. Paul, MN

St. Paul metro · Minnesota

Radon Mitigation cost in St. Paul, MN

St. Paul homeowners typically pay $955 – $2,650 for radon mitigation. Local labor and materials price 6% above the national average.

Get my St. Paul estimate Use the St. Paul calculator

St. Paul average

$1,800

Typical low

$955

Typical high

$2,650

Per system

$955 – $2,650

Sample ZIP

What drives St. Paul pricing

Local labor

Licensed trade labor in St. Paul runs about 106% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most St. Paul, MN projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Minnesota weather drives material choices here, so ask contractors what they install most often in St. Paul and why.

Instant cost calculator

Adjust the inputs to see live pricing

Number of suction points1 system

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$1,045 – $1,473

Most homeowners pay around $1,259

Compare quality / material level

Cost by material in St. Paul

Installed St. Paul pricing per system.

Option	Installed cost	Pros	Cons
Single-point sub-slab system	$1,100 – $1,550	—	—
Sub-slab with sealing	$1,550 – $2,000	—	—
Crawlspace membrane system	$2,000 – $2,600	—	—
Multi-point system with monitoring	$2,600 – $3,600	—	—

Where the money goes in St. Paul

A typical $1,800 St. Paul project, broken down by line item.

Labor0.45% · $8
Materials0.38% · $7
Permits & inspections0.05% · $1
Overhead & profit0.12% · $2

Common add-ons

Extras that show up on St. Paul quotes but rarely in the headline price.

Post-mitigation testing

$160 – $320

Crawlspace vapor barrier

$1,600 – $5,300

Sump pit sealing

$210 – $850

Continuous radon monitor

$160 – $425

Ways to save in St. Paul

Test first with a $20 kit before commissioning a system.
Route the pipe on the least visible elevation to skip cosmetic upgrades.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

St. Paul FAQs

Get a St. Paul price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your MN ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More St. Paul research

Best radon mitigation companies in St. Paul Radon Mitigation permits in Minnesota Radon Mitigation near me All Minnesota prices

More Minnesota cities

Minneapolis Rochester Duluth Bloomington Plymouth

Other project costs in St. Paul

Fence Installation in St. Paul

$1,590 – $4,240

Roof Replacement in St. Paul

$9,010 – $36,040

Kitchen Remodel in St. Paul

$19,080 – $100,700

HVAC Replacement in St. Paul

$5,830 – $19,080

Deck Building in St. Paul

$4,664 – $12,720

Window Replacement in St. Paul

$477 – $1,590

See every St. Paul cost guide