How much does radon mitigation cost in Tyler, TX?

Most Tyler homeowners spend between $865 – $2,400 on radon mitigation, with an average around $1,650. Local labor prices 4% below the national average, so Tyler quotes tend to land at the lower end of national ranges.

Why is radon mitigation more or less expensive in Tyler than elsewhere?

Licensed trade labor in Tyler runs about 96% of the national average, and the best crews book out fastest in spring and early summer. Texas weather drives material choices here, so ask contractors what they install most often in Tyler and why.

Do I need a permit for radon mitigation in Tyler, Texas?

Most Tyler, TX projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Tyler?

Get at least three written quotes from licensed, insured Texas contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Tyler metro market.

How much does radon mitigation cost in 2026?

Most homeowners pay between $900 and $2,500, with a national average near $1,700. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per system?

Installed pricing usually runs $900.00 to $2,500.00 per system, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-system price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Radon Mitigation/Tyler, TX

Tyler metro · Texas

Radon Mitigation cost in Tyler, TX

Tyler homeowners typically pay $865 – $2,400 for radon mitigation. Local labor and materials price 4% below the national average.

Get my Tyler estimate Use the Tyler calculator

Tyler average

$1,650

Typical low

$865

Typical high

$2,400

Per system

$865 – $2,400

Sample ZIP

What drives Tyler pricing

Local labor

Licensed trade labor in Tyler runs about 96% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Tyler, TX projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Texas weather drives material choices here, so ask contractors what they install most often in Tyler and why.

Instant cost calculator

Adjust the inputs to see live pricing

Number of suction points1 system

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$950 – $1,330

Most homeowners pay around $1,140

Compare quality / material level

Cost by material in Tyler

Installed Tyler pricing per system.

Option	Installed cost	Pros	Cons
Single-point sub-slab system	$1,000 – $1,400	—	—
Sub-slab with sealing	$1,400 – $1,850	—	—
Crawlspace membrane system	$1,850 – $2,350	—	—
Multi-point system with monitoring	$2,350 – $3,250	—	—

Where the money goes in Tyler

A typical $1,650 Tyler project, broken down by line item.

Labor0.45% · $7
Materials0.38% · $6
Permits & inspections0.05% · $1
Overhead & profit0.12% · $2

Common add-ons

Extras that show up on Tyler quotes but rarely in the headline price.

Post-mitigation testing

$145 – $290

Crawlspace vapor barrier

$1,450 – $4,800

Sump pit sealing

$190 – $770

Continuous radon monitor

$145 – $385

Ways to save in Tyler

Test first with a $20 kit before commissioning a system.
Route the pipe on the least visible elevation to skip cosmetic upgrades.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Tyler FAQs

Get a Tyler price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your TX ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Tyler research

Best radon mitigation companies in Tyler Radon Mitigation permits in Texas Radon Mitigation near me All Texas prices

More Texas cities

Dallas Fort Worth Plano Frisco Arlington Irving McKinney Denton

Other project costs in Tyler

Fence Installation in Tyler

$1,440 – $3,840

Roof Replacement in Tyler

$8,160 – $32,640

Kitchen Remodel in Tyler

$17,280 – $91,200

HVAC Replacement in Tyler

$5,280 – $17,280

Deck Building in Tyler

$4,224 – $11,520

Window Replacement in Tyler

$432 – $1,440

See every Tyler cost guide