How much does sewer line replacement cost in Grand Rapids, MI?

Most Grand Rapids homeowners spend between $4,700 – $14,700 on sewer line replacement, with an average around $9,700. Local labor prices 2% below the national average, so Grand Rapids quotes tend to land at the lower end of national ranges.

Why is sewer line replacement more or less expensive in Grand Rapids than elsewhere?

Licensed trade labor in Grand Rapids runs about 98% of the national average, and the best crews book out fastest in spring and early summer. Michigan weather drives material choices here, so ask contractors what they install most often in Grand Rapids and why.

Do I need a permit for sewer line replacement in Grand Rapids, Michigan?

Most Grand Rapids, MI projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Grand Rapids?

Get at least three written quotes from licensed, insured Michigan contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Grand Rapids metro market.

How much does sewer line replacement cost in 2026?

Most homeowners pay between $4,800 and $15,000, with a national average near $9,900. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per linear foot?

Installed pricing usually runs $80.00 to $250.00 per linear foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-linear foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Sewer Line Replacement/Grand Rapids, MI

Grand Rapids metro · Michigan

Sewer Line Replacement cost in Grand Rapids, MI

Grand Rapids homeowners typically pay $4,700 – $14,700 for sewer line replacement. Local labor and materials price 2% below the national average.

Get my Grand Rapids estimate Use the Grand Rapids calculator

Grand Rapids average

$9,700

Typical low

$4,700

Typical high

$14,700

Per linear foot

$78 – $245

Sample ZIP

What drives Grand Rapids pricing

Local labor

Licensed trade labor in Grand Rapids runs about 98% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Grand Rapids, MI projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Michigan weather drives material choices here, so ask contractors what they install most often in Grand Rapids and why.

Instant cost calculator

Adjust the inputs to see live pricing

Line length (linear feet)60 linear feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$5,700 – $7,695

Most homeowners pay around $6,698

Compare quality / material level

Cost by material in Grand Rapids

Installed Grand Rapids pricing per linear foot.

Option	Installed cost	Pros	Cons
Spot repair	$100 – $135	—	—
Traditional trench replacement	$135 – $180	—	—
Pipe bursting (trenchless)	$180 – $235	—	—
CIPP lining (trenchless)	$235 – $325	—	—

Where the money goes in Grand Rapids

A typical $9,700 Grand Rapids project, broken down by line item.

Labor0.45% · $44
Materials0.38% · $37
Permits & inspections0.05% · $5
Overhead & profit0.12% · $12

Common add-ons

Extras that show up on Grand Rapids quotes but rarely in the headline price.

Camera inspection

$145 – $490

Cleanout installation

$390 – $1,200

Landscape and concrete restoration

$490 – $3,900

Permit and city tap fee

$195 – $1,450

Ways to save in Grand Rapids

Get a camera inspection first — many failures only need a spot repair.
Ask whether pipe bursting avoids driveway demolition and restoration cost.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Grand Rapids FAQs

Get a Grand Rapids price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your MI ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Grand Rapids research

Best sewer line replacement companies in Grand Rapids Sewer Line Replacement permits in Michigan Sewer Line Replacement near me All Michigan prices

More Michigan cities

Detroit Ann Arbor Lansing Sterling Heights Warren

Other project costs in Grand Rapids

Fence Installation in Grand Rapids

$1,470 – $3,920

Roof Replacement in Grand Rapids

$8,330 – $33,320

Kitchen Remodel in Grand Rapids

$17,640 – $93,100

HVAC Replacement in Grand Rapids

$5,390 – $17,640

Deck Building in Grand Rapids

$4,312 – $11,760

Window Replacement in Grand Rapids

$441 – $1,470

See every Grand Rapids cost guide