How much does stucco repair cost in 2026?

Most homeowners pay between $1,600 and $5,000, with a national average near $3,300. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per square foot?

Installed pricing usually runs $8.00 to $25.00 per square foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-square foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

When is the cheapest time to book?

Off-season and shoulder months. Booking outside the spring–summer rush, and staying flexible on start dates, commonly saves 5–15% because crews are filling calendar gaps.

Yes. Contractor financing, a home equity line, or a 0% promotional card are all common. Compare the total interest cost against paying cash — promotional financing is sometimes priced into a higher bid.

How do I avoid getting overcharged?

Get the scope in writing with materials by brand and model, quantities, exclusions, permit responsibility, payment schedule and warranty. Never pay more than one third up front, and never pay in full before the final inspection.

Why is my stucco cracking?

Hairline cracks are normal settling. Stair-step cracks, bulging or damp interior walls signal a moisture barrier failure that needs remediation, not a patch.

Can stucco repairs be color matched?

Texture matching is usually good; color rarely matches exactly. Most contractors recommend coating the full elevation after a large patch.

How long does stucco last?

Properly installed three-coat stucco lasts 50–80 years, but the sealants and flashings behind it need attention every 5–10 years.

Home/Cost guides/Stucco Repair

Construction

How much does stucco repair cost?

Stucco Repair costs $1,600 to $5,000 for a typical project, averaging about $3,300. Installed pricing usually runs $8.00 to $25.00 per square foot, and scope, materials, access and local labor rates explain nearly all of the variation.

Get my personalized estimate Use the calculator

National average

$3,300

Typical low

$1,600

Typical high

$5,000

Per square foot

$8 – $25

Instant cost calculator

Adjust the inputs to see live pricing

Damaged area (sq ft)200 square feet

Quality / material level

Site access

Removal / prep work

Timing

Region

Estimated project cost

$2,235 – $3,066

Most homeowners pay around $2,650

Compare quality / material level

Cost by material

Installed pricing per square foot.

Option	Installed cost	Pros	Cons
Patch and paint	$10 – $14	—	—
Partial re-stucco	$14 – $18	—	—
Full re-stucco (three coat)	$18 – $24	—	—
Stucco remediation with new WRB	$24 – $33	—	—

Stucco Repair cost by project size

Typical installed pricing before local adjustments.

Project size	Budget	Average	Premium
100 square foots	$800	$1,650	$2,500
200 square foots	$1,600	$3,300	$5,000
300 square foots	$2,400	$4,950	$7,500
400 square foots	$3,200	$6,600	$10,000

Stucco Repair cost by material or quality level

Option	Price range	Best for
Patch and paint	$10.23 – $14.03 / square foot	Lowest upfront cost, shortest lifespan
Partial re-stucco	$14.03 – $18.48 / square foot	Best overall value for most homes
Full re-stucco (three coat)	$18.48 – $23.93 / square foot	Longer warranty and better finish
Stucco remediation with new WRB	$23.93 – $33.00 / square foot	Top-tier materials and custom detailing

Where the money goes

A typical project budget, broken down by line item.

Labor0.45% · $15
Materials0.38% · $13
Permits & inspections0.05% · $2
Overhead & profit0.12% · $4

Cost by region

Labor markets move the number more than any other single factor.

Northeast

$1,840 – $5,750

+15% vs. national average

West

$1,888 – $5,900

+18% vs. national average

Midwest

$1,536 – $4,800

-4% vs. national average

South

$1,504 – $4,700

-6% vs. national average

Common add-ons

Line items that show up on most quotes but rarely in the headline price.

Moisture testing

$300 – $900

Lath replacement

$4 – $12

Sealant and flashing

$300 – $1,500

Elastomeric coating

$2 – $4

DIY vs. hiring a pro

Hire a pro

$1,600 – $5,000

Do it yourself

$720 – $2,750

DIY saves labor but not materials, permits or rework. Only take it on if the job does not require a licensed trade or inspection.

Ways to save

Practical levers that lower the bill without cutting quality.

Repair cracks early — water intrusion turns a $600 patch into a $12,000 remediation.
Bundle repair with a whole-wall coating for a uniform color.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Questions to ask your contractor

01Are you licensed and insured in my city, and can I see the certificate?
02Is this a fixed-price bid or an estimate that can change?
03What exactly is excluded from the quote?
04Who pulls the permit and who schedules inspections?
05What is the written workmanship warranty and how long does it last?
06What is the payment schedule, and how much is due up front?
07How long will the work take, and what could delay it?

Frequently asked questions

Ready for a number you can budget against?

Answer a few questions about your project and we'll model a low, average and premium price for your ZIP code — then connect you with vetted pros.

Get free quotes from certified pros

Stucco Repair cost by city

Local labor rates, permits and climate change the number. Pick your city for prices near you.

Stucco Repair cost in Los Angeles, CA

$1,984 – $6,200

Stucco Repair cost in San Diego, CA

$1,888 – $5,900

Stucco Repair cost in San Jose, CA

$2,208 – $6,900

Stucco Repair cost in San Francisco, CA

$2,320 – $7,250

Stucco Repair cost in Oakland, CA

$2,112 – $6,600

Stucco Repair cost in Sacramento, CA

$1,728 – $5,400

Stucco Repair cost in Fresno, CA

$1,568 – $4,900

Stucco Repair cost in Long Beach, CA

$1,952 – $6,100

Stucco Repair cost in Anaheim, CA

$1,920 – $6,000

Stucco Repair cost in Santa Ana, CA

$1,904 – $5,950

Stucco Repair cost in Irvine, CA

$2,016 – $6,300

Stucco Repair cost in Riverside, CA

$1,696 – $5,300

Stucco Repair cost in San Bernardino, CA

$1,648 – $5,150

Stucco Repair cost in Bakersfield, CA

$1,552 – $4,850

Stucco Repair cost in Stockton, CA

$1,632 – $5,100

Stucco Repair cost in Modesto, CA

$1,600 – $5,000

Stucco Repair cost in Chula Vista, CA

$1,840 – $5,750

Stucco Repair cost in Fremont, CA

$2,160 – $6,750

Stucco Repair cost in Pasadena, CA

$2,048 – $6,400

Stucco Repair cost in Glendale, CA

$2,000 – $6,250

Stucco Repair cost in Santa Clarita, CA

$1,856 – $5,800

Stucco Repair cost in Torrance, CA

$1,968 – $6,150

Stucco Repair cost in Oxnard, CA

$1,824 – $5,700

Stucco Repair cost in San Mateo, CA

$2,240 – $7,000

See all cities