How much does water heater installation cost in Memphis, TN?

Most Memphis homeowners spend between $1,100 – $3,200 on water heater installation, with an average around $1,950. Local labor prices 8% below the national average, so Memphis quotes tend to land at the lower end of national ranges.

Why is water heater installation more or less expensive in Memphis than elsewhere?

Licensed trade labor in Memphis runs about 92% of the national average, and the best crews book out fastest in spring and early summer. Tennessee weather drives material choices here, so ask contractors what they install most often in Memphis and why.

Do I need a permit for water heater installation in Memphis, Tennessee?

Most Memphis, TN projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Memphis?

Get at least three written quotes from licensed, insured Tennessee contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Memphis metro market.

How much does it cost to replace a water heater?

$1,200 to $3,500 installed. A straight 50-gallon tank swap is $1,200 to $2,400; tankless conversion is $3,000 to $6,500.

Is tankless worth it?

If you plan to stay 10+ years, yes. It costs two to three times more to install but lasts twice as long and cuts water heating energy 20% to 30%.

How long does a water heater last?

Eight to twelve years for a gas tank, ten to fifteen for electric, and twenty or more for tankless with annual descaling.

What size water heater do I need?

40 gallons for two to three people, 50 for three to four, 75 to 80 for five or more. First-hour rating matters more than raw capacity.

Is a heat pump water heater a good idea?

In a garage or basement with adequate space and a mild climate, it cuts water heating cost 60% to 70% and often qualifies for large rebates.

Most jurisdictions require one, especially for gas and venting changes. Unpermitted work can surface at resale.

Home/Cost guides/Water Heater Installation/Memphis, TN

Memphis metro · Tennessee

Water Heater Installation cost in Memphis, TN

Memphis homeowners typically pay $1,100 – $3,200 for water heater installation. Local labor and materials price 8% below the national average.

Get my Memphis estimate Use the Memphis calculator

Memphis average

$1,950

Typical low

$1,100

Typical high

$3,200

Per unit

$830 – $6,000

Sample ZIP

What drives Memphis pricing

Local labor

Licensed trade labor in Memphis runs about 92% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Memphis, TN projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Tennessee weather drives material choices here, so ask contractors what they install most often in Memphis and why.

Instant cost calculator

Adjust the inputs to see live pricing

Units1 unit

Water heater type

Fuel or type change

Location

Estimated project cost

$920 – $2,300

Most homeowners pay around $1,610

Compare water heater type

Cost by material in Memphis

Installed Memphis pricing per unit.

Option	Installed cost	Pros	Cons
Gas tank	$920 – $2,300	Fast recovery, cheap to run	Needs venting, 8-12 year life
Electric tank	$830 – $2,000	Cheapest install, no venting	Slower recovery, higher operating cost
Gas tankless	$2,300 – $5,500	Endless hot water, 20+ year life, saves space	Costly install, may need larger gas line
Electric tankless	$1,400 – $3,700	Compact, point-of-use friendly	Big amperage draw, struggles in cold climates
Heat pump (hybrid)	$2,000 – $5,050	Cuts water heating energy 60-70%, rebate eligible	Needs conditioned space and clearance
Solar water heater	$3,200 – $8,300	Lowest operating cost	Backup unit still required

Where the money goes in Memphis

A typical $1,950 Memphis project, broken down by line item.

Water heater unit48% · $936
Labor32% · $624
Venting, gas or electrical12% · $234
Permit, disposal and fittings8% · $156

Common add-ons

Extras that show up on Memphis quotes but rarely in the headline price.

Expansion tank

$92 – $320

New gas line or upsizing

$275 – $1,100

Dedicated 240V circuit

$370 – $1,100

Venting modification

$275 – $1,400

Drain pan and leak sensor

$92 – $370

Water softener

$735 – $2,750

Ways to save in Memphis

Replace before it fails so you are not paying emergency rates.
Right-size the tank; oversizing wastes standby energy every day for a decade.
Check federal, state and utility rebates for heat pump water heaters — they can cover $500 to $2,000.
Stay with your existing fuel type unless energy math clearly favors switching.
Buy the unit yourself during a sale and pay only for installation labor.

Memphis FAQs

Get a Memphis price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your TN ZIP code — then connect you with vetted local pros.

Get water heater quotes

More Memphis research

Best water heater installation companies in Memphis Water Heater Installation permits in Tennessee Water Heater Installation near me All Tennessee prices

More Tennessee cities

Nashville Knoxville Chattanooga Franklin Murfreesboro

Other project costs in Memphis

Fence Installation in Memphis

$1,380 – $3,680

Roof Replacement in Memphis

$7,820 – $31,280

Kitchen Remodel in Memphis

$16,560 – $87,400

HVAC Replacement in Memphis

$5,060 – $16,560

Deck Building in Memphis

$4,048 – $11,040

Window Replacement in Memphis

$414 – $1,380

See every Memphis cost guide