How much does water well drilling cost in Aberdeen, SD?

Most Aberdeen homeowners spend between $4,450 – $11,600 on water well drilling, with an average around $8,000. Local labor prices 11% below the national average, so Aberdeen quotes tend to land at the lower end of national ranges.

Why is water well drilling more or less expensive in Aberdeen than elsewhere?

Licensed trade labor in Aberdeen runs about 89% of the national average, and the best crews book out fastest in spring and early summer. South Dakota weather drives material choices here, so ask contractors what they install most often in Aberdeen and why.

Do I need a permit for water well drilling in Aberdeen, South Dakota?

Most Aberdeen, SD projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Aberdeen?

Get at least three written quotes from licensed, insured South Dakota contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Aberdeen metro market.

How much does water well drilling cost in 2026?

Most homeowners pay between $5,000 and $13,000, with a national average near $9,000. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per foot?

Installed pricing usually runs $25.00 to $65.00 per foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Water Well Drilling/Aberdeen, SD

Aberdeen metro · South Dakota

Water Well Drilling cost in Aberdeen, SD

Aberdeen homeowners typically pay $4,450 – $11,600 for water well drilling. Local labor and materials price 11% below the national average.

Get my Aberdeen estimate Use the Aberdeen calculator

Aberdeen average

$8,000

Typical low

$4,450

Typical high

$11,600

Per foot

$22 – $58

Sample ZIP

What drives Aberdeen pricing

Local labor

Licensed trade labor in Aberdeen runs about 89% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Aberdeen, SD projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

South Dakota weather drives material choices here, so ask contractors what they install most often in Aberdeen and why.

Instant cost calculator

Adjust the inputs to see live pricing

Well depth (feet)200 feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$4,750 – $6,460

Most homeowners pay around $5,605

Compare quality / material level

Cost by material in Aberdeen

Installed Aberdeen pricing per foot.

Option	Installed cost	Pros	Cons
Shallow well	$25 – $34	—	—
Standard drilled well	$34 – $45	—	—
Deep rock well	$45 – $58	—	—
Deep well with treatment system	$58 – $80	—	—

Where the money goes in Aberdeen

A typical $8,000 Aberdeen project, broken down by line item.

Labor0.45% · $36
Materials0.38% · $30
Permits & inspections0.05% · $4
Overhead & profit0.12% · $10

Common add-ons

Extras that show up on Aberdeen quotes but rarely in the headline price.

Pump and pressure tank

$1,050 – $3,550

Water testing

$89 – $445

Casing beyond standard

$18 – $45

Filtration or softener

$890 – $3,550

Ways to save in Aberdeen

Ask neighbors how deep their wells are before budgeting.
Bundle pump, tank and wiring with the drilling contract for one mobilization.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Aberdeen FAQs

Get a Aberdeen price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your SD ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Aberdeen research

Best water well drilling companies in Aberdeen Water Well Drilling permits in South Dakota Water Well Drilling near me All South Dakota prices

More South Dakota cities

Sioux Falls Rapid City

Other project costs in Aberdeen

Fence Installation in Aberdeen

$1,335 – $3,560

Roof Replacement in Aberdeen

$7,565 – $30,260

Kitchen Remodel in Aberdeen

$16,020 – $84,550

HVAC Replacement in Aberdeen

$4,895 – $16,020

Deck Building in Aberdeen

$3,916 – $10,680

Window Replacement in Aberdeen

$401 – $1,335

See every Aberdeen cost guide