How much does water well drilling cost in Ankeny, IA?

Most Ankeny homeowners spend between $4,600 – $12,000 on water well drilling, with an average around $8,300. Local labor prices 8% below the national average, so Ankeny quotes tend to land at the lower end of national ranges.

Why is water well drilling more or less expensive in Ankeny than elsewhere?

Licensed trade labor in Ankeny runs about 92% of the national average, and the best crews book out fastest in spring and early summer. Iowa weather drives material choices here, so ask contractors what they install most often in Ankeny and why.

Do I need a permit for water well drilling in Ankeny, Iowa?

Most Ankeny, IA projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Ankeny?

Get at least three written quotes from licensed, insured Iowa contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Ankeny metro market.

How much does water well drilling cost in 2026?

Most homeowners pay between $5,000 and $13,000, with a national average near $9,000. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per foot?

Installed pricing usually runs $25.00 to $65.00 per foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Water Well Drilling/Ankeny, IA

Ankeny metro · Iowa

Water Well Drilling cost in Ankeny, IA

Ankeny homeowners typically pay $4,600 – $12,000 for water well drilling. Local labor and materials price 8% below the national average.

Get my Ankeny estimate Use the Ankeny calculator

Ankeny average

$8,300

Typical low

$4,600

Typical high

$12,000

Per foot

$23 – $60

Sample ZIP

What drives Ankeny pricing

Local labor

Licensed trade labor in Ankeny runs about 92% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Ankeny, IA projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Iowa weather drives material choices here, so ask contractors what they install most often in Ankeny and why.

Instant cost calculator

Adjust the inputs to see live pricing

Well depth (feet)200 feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$4,940 – $6,650

Most homeowners pay around $5,795

Compare quality / material level

Cost by material in Ankeny

Installed Ankeny pricing per foot.

Option	Installed cost	Pros	Cons
Shallow well	$26 – $35	—	—
Standard drilled well	$35 – $46	—	—
Deep rock well	$46 – $60	—	—
Deep well with treatment system	$60 – $83	—	—

Where the money goes in Ankeny

A typical $8,300 Ankeny project, broken down by line item.

Labor0.45% · $37
Materials0.38% · $32
Permits & inspections0.05% · $4
Overhead & profit0.12% · $10

Common add-ons

Extras that show up on Ankeny quotes but rarely in the headline price.

Pump and pressure tank

$1,100 – $3,700

Water testing

$92 – $460

Casing beyond standard

$18 – $46

Filtration or softener

$920 – $3,700

Ways to save in Ankeny

Ask neighbors how deep their wells are before budgeting.
Bundle pump, tank and wiring with the drilling contract for one mobilization.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Ankeny FAQs

Get a Ankeny price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your IA ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Ankeny research

Best water well drilling companies in Ankeny Water Well Drilling permits in Iowa Water Well Drilling near me All Iowa prices

More Iowa cities

Des Moines Cedar Rapids Davenport Iowa City

Other project costs in Ankeny

Fence Installation in Ankeny

$1,380 – $3,680

Roof Replacement in Ankeny

$7,820 – $31,280

Kitchen Remodel in Ankeny

$16,560 – $87,400

HVAC Replacement in Ankeny

$5,060 – $16,560

Deck Building in Ankeny

$4,048 – $11,040

Window Replacement in Ankeny

$414 – $1,380

See every Ankeny cost guide