How much does water well drilling cost in Billings, MT?

Most Billings homeowners spend between $5,100 – $13,300 on water well drilling, with an average around $9,200. Local labor prices 2% above the national average, so Billings quotes tend to land at the higher end of national ranges.

Why is water well drilling more or less expensive in Billings than elsewhere?

Licensed trade labor in Billings runs about 102% of the national average, and the best crews book out fastest in spring and early summer. Montana weather drives material choices here, so ask contractors what they install most often in Billings and why.

Do I need a permit for water well drilling in Billings, Montana?

Most Billings, MT projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Billings?

Get at least three written quotes from licensed, insured Montana contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Billings metro market.

How much does water well drilling cost in 2026?

Most homeowners pay between $5,000 and $13,000, with a national average near $9,000. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per foot?

Installed pricing usually runs $25.00 to $65.00 per foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Water Well Drilling/Billings, MT

Billings metro · Montana

Water Well Drilling cost in Billings, MT

Billings homeowners typically pay $5,100 – $13,300 for water well drilling. Local labor and materials price 2% above the national average.

Get my Billings estimate Use the Billings calculator

Billings average

$9,200

Typical low

$5,100

Typical high

$13,300

Per foot

$26 – $66

Sample ZIP

What drives Billings pricing

Local labor

Licensed trade labor in Billings runs about 102% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Billings, MT projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Montana weather drives material choices here, so ask contractors what they install most often in Billings and why.

Instant cost calculator

Adjust the inputs to see live pricing

Well depth (feet)200 feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$5,320 – $7,410

Most homeowners pay around $6,365

Compare quality / material level

Cost by material in Billings

Installed Billings pricing per foot.

Option	Installed cost	Pros	Cons
Shallow well	$28 – $39	—	—
Standard drilled well	$39 – $51	—	—
Deep rock well	$51 – $67	—	—
Deep well with treatment system	$67 – $92	—	—

Where the money goes in Billings

A typical $9,200 Billings project, broken down by line item.

Labor0.45% · $41
Materials0.38% · $35
Permits & inspections0.05% · $5
Overhead & profit0.12% · $11

Common add-ons

Extras that show up on Billings quotes but rarely in the headline price.

Pump and pressure tank

$1,200 – $4,100

Water testing

$100 – $510

Casing beyond standard

$20 – $51

Filtration or softener

$1,000 – $4,100

Ways to save in Billings

Ask neighbors how deep their wells are before budgeting.
Bundle pump, tank and wiring with the drilling contract for one mobilization.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Billings FAQs

Get a Billings price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your MT ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Billings research

Best water well drilling companies in Billings Water Well Drilling permits in Montana Water Well Drilling near me All Montana prices

More Montana cities

Missoula Bozeman Great Falls

Other project costs in Billings

Fence Installation in Billings

$1,530 – $4,080

Roof Replacement in Billings

$8,670 – $34,680

Kitchen Remodel in Billings

$18,360 – $96,900

HVAC Replacement in Billings

$5,610 – $18,360

Deck Building in Billings

$4,488 – $12,240

Window Replacement in Billings

$459 – $1,530

See every Billings cost guide