How much does water well drilling cost in Grand Forks, ND?

Most Grand Forks homeowners spend between $4,700 – $12,200 on water well drilling, with an average around $8,450. Local labor prices 6% below the national average, so Grand Forks quotes tend to land at the lower end of national ranges.

Why is water well drilling more or less expensive in Grand Forks than elsewhere?

Licensed trade labor in Grand Forks runs about 94% of the national average, and the best crews book out fastest in spring and early summer. North Dakota weather drives material choices here, so ask contractors what they install most often in Grand Forks and why.

Do I need a permit for water well drilling in Grand Forks, North Dakota?

Most Grand Forks, ND projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Grand Forks?

Get at least three written quotes from licensed, insured North Dakota contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Grand Forks metro market.

How much does water well drilling cost in 2026?

Most homeowners pay between $5,000 and $13,000, with a national average near $9,000. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per foot?

Installed pricing usually runs $25.00 to $65.00 per foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Water Well Drilling/Grand Forks, ND

Grand Forks metro · North Dakota

Water Well Drilling cost in Grand Forks, ND

Grand Forks homeowners typically pay $4,700 – $12,200 for water well drilling. Local labor and materials price 6% below the national average.

Get my Grand Forks estimate Use the Grand Forks calculator

Grand Forks average

$8,450

Typical low

$4,700

Typical high

$12,200

Per foot

$24 – $61

Sample ZIP

What drives Grand Forks pricing

Local labor

Licensed trade labor in Grand Forks runs about 94% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Grand Forks, ND projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

North Dakota weather drives material choices here, so ask contractors what they install most often in Grand Forks and why.

Instant cost calculator

Adjust the inputs to see live pricing

Well depth (feet)200 feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$4,940 – $6,840

Most homeowners pay around $5,890

Compare quality / material level

Cost by material in Grand Forks

Installed Grand Forks pricing per foot.

Option	Installed cost	Pros	Cons
Shallow well	$26 – $36	—	—
Standard drilled well	$36 – $47	—	—
Deep rock well	$47 – $61	—	—
Deep well with treatment system	$61 – $85	—	—

Where the money goes in Grand Forks

A typical $8,450 Grand Forks project, broken down by line item.

Labor0.45% · $38
Materials0.38% · $32
Permits & inspections0.05% · $4
Overhead & profit0.12% · $10

Common add-ons

Extras that show up on Grand Forks quotes but rarely in the headline price.

Pump and pressure tank

$1,150 – $3,750

Water testing

$94 – $470

Casing beyond standard

$19 – $47

Filtration or softener

$940 – $3,750

Ways to save in Grand Forks

Ask neighbors how deep their wells are before budgeting.
Bundle pump, tank and wiring with the drilling contract for one mobilization.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Grand Forks FAQs

Get a Grand Forks price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your ND ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Grand Forks research

Best water well drilling companies in Grand Forks Water Well Drilling permits in North Dakota Water Well Drilling near me All North Dakota prices

More North Dakota cities

Fargo Bismarck

Other project costs in Grand Forks

Fence Installation in Grand Forks

$1,410 – $3,760

Roof Replacement in Grand Forks

$7,990 – $31,960

Kitchen Remodel in Grand Forks

$16,920 – $89,300

HVAC Replacement in Grand Forks

$5,170 – $16,920

Deck Building in Grand Forks

$4,136 – $11,280

Window Replacement in Grand Forks

$423 – $1,410

See every Grand Forks cost guide