How much does water well drilling cost in Idaho Falls, ID?

Most Idaho Falls homeowners spend between $4,750 – $12,400 on water well drilling, with an average around $8,550. Local labor prices 5% below the national average, so Idaho Falls quotes tend to land at the lower end of national ranges.

Why is water well drilling more or less expensive in Idaho Falls than elsewhere?

Licensed trade labor in Idaho Falls runs about 95% of the national average, and the best crews book out fastest in spring and early summer. Idaho weather drives material choices here, so ask contractors what they install most often in Idaho Falls and why.

Do I need a permit for water well drilling in Idaho Falls, Idaho?

Most Idaho Falls, ID projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Idaho Falls?

Get at least three written quotes from licensed, insured Idaho contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Idaho Falls metro market.

How much does water well drilling cost in 2026?

Most homeowners pay between $5,000 and $13,000, with a national average near $9,000. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per foot?

Installed pricing usually runs $25.00 to $65.00 per foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Water Well Drilling/Idaho Falls, ID

Idaho Falls metro · Idaho

Water Well Drilling cost in Idaho Falls, ID

Idaho Falls homeowners typically pay $4,750 – $12,400 for water well drilling. Local labor and materials price 5% below the national average.

Get my Idaho Falls estimate Use the Idaho Falls calculator

Idaho Falls average

$8,550

Typical low

$4,750

Typical high

$12,400

Per foot

$24 – $62

Sample ZIP

What drives Idaho Falls pricing

Local labor

Licensed trade labor in Idaho Falls runs about 95% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Idaho Falls, ID projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Idaho weather drives material choices here, so ask contractors what they install most often in Idaho Falls and why.

Instant cost calculator

Adjust the inputs to see live pricing

Well depth (feet)200 feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$5,130 – $6,840

Most homeowners pay around $5,985

Compare quality / material level

Cost by material in Idaho Falls

Installed Idaho Falls pricing per foot.

Option	Installed cost	Pros	Cons
Shallow well	$27 – $36	—	—
Standard drilled well	$36 – $48	—	—
Deep rock well	$48 – $62	—	—
Deep well with treatment system	$62 – $86	—	—

Where the money goes in Idaho Falls

A typical $8,550 Idaho Falls project, broken down by line item.

Labor0.45% · $38
Materials0.38% · $32
Permits & inspections0.05% · $4
Overhead & profit0.12% · $10

Common add-ons

Extras that show up on Idaho Falls quotes but rarely in the headline price.

Pump and pressure tank

$1,150 – $3,800

Water testing

$95 – $475

Casing beyond standard

$19 – $48

Filtration or softener

$950 – $3,800

Ways to save in Idaho Falls

Ask neighbors how deep their wells are before budgeting.
Bundle pump, tank and wiring with the drilling contract for one mobilization.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Idaho Falls FAQs

Get a Idaho Falls price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your ID ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Idaho Falls research

Best water well drilling companies in Idaho Falls Water Well Drilling permits in Idaho Water Well Drilling near me All Idaho prices

More Idaho cities

Boise Meridian Nampa Coeur d'Alene

Other project costs in Idaho Falls

Fence Installation in Idaho Falls

$1,425 – $3,800

Roof Replacement in Idaho Falls

$8,075 – $32,300

Kitchen Remodel in Idaho Falls

$17,100 – $90,250

HVAC Replacement in Idaho Falls

$5,225 – $17,100

Deck Building in Idaho Falls

$4,180 – $11,400

Window Replacement in Idaho Falls

$428 – $1,425

See every Idaho Falls cost guide