How much does water well drilling cost in Murfreesboro, TN?

Most Murfreesboro homeowners spend between $4,800 – $12,500 on water well drilling, with an average around $8,650. Local labor prices 4% below the national average, so Murfreesboro quotes tend to land at the lower end of national ranges.

Why is water well drilling more or less expensive in Murfreesboro than elsewhere?

Licensed trade labor in Murfreesboro runs about 96% of the national average, and the best crews book out fastest in spring and early summer. Tennessee weather drives material choices here, so ask contractors what they install most often in Murfreesboro and why.

Do I need a permit for water well drilling in Murfreesboro, Tennessee?

Most Murfreesboro, TN projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Murfreesboro?

Get at least three written quotes from licensed, insured Tennessee contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Murfreesboro metro market.

How much does water well drilling cost in 2026?

Most homeowners pay between $5,000 and $13,000, with a national average near $9,000. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per foot?

Installed pricing usually runs $25.00 to $65.00 per foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Water Well Drilling/Murfreesboro, TN

Murfreesboro metro · Tennessee

Water Well Drilling cost in Murfreesboro, TN

Murfreesboro homeowners typically pay $4,800 – $12,500 for water well drilling. Local labor and materials price 4% below the national average.

Get my Murfreesboro estimate Use the Murfreesboro calculator

Murfreesboro average

$8,650

Typical low

$4,800

Typical high

$12,500

Per foot

$24 – $62

Sample ZIP

What drives Murfreesboro pricing

Local labor

Licensed trade labor in Murfreesboro runs about 96% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Murfreesboro, TN projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Tennessee weather drives material choices here, so ask contractors what they install most often in Murfreesboro and why.

Instant cost calculator

Adjust the inputs to see live pricing

Well depth (feet)200 feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$5,130 – $7,030

Most homeowners pay around $6,080

Compare quality / material level

Cost by material in Murfreesboro

Installed Murfreesboro pricing per foot.

Option	Installed cost	Pros	Cons
Shallow well	$27 – $37	—	—
Standard drilled well	$37 – $48	—	—
Deep rock well	$48 – $63	—	—
Deep well with treatment system	$63 – $86	—	—

Where the money goes in Murfreesboro

A typical $8,650 Murfreesboro project, broken down by line item.

Labor0.45% · $39
Materials0.38% · $33
Permits & inspections0.05% · $4
Overhead & profit0.12% · $10

Common add-ons

Extras that show up on Murfreesboro quotes but rarely in the headline price.

Pump and pressure tank

$1,150 – $3,850

Water testing

$96 – $480

Casing beyond standard

$19 – $48

Filtration or softener

$960 – $3,850

Ways to save in Murfreesboro

Ask neighbors how deep their wells are before budgeting.
Bundle pump, tank and wiring with the drilling contract for one mobilization.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Murfreesboro FAQs

Get a Murfreesboro price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your TN ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Murfreesboro research

Best water well drilling companies in Murfreesboro Water Well Drilling permits in Tennessee Water Well Drilling near me All Tennessee prices

More Tennessee cities

Nashville Memphis Knoxville Chattanooga Franklin

Other project costs in Murfreesboro

Fence Installation in Murfreesboro

$1,440 – $3,840

Roof Replacement in Murfreesboro

$8,160 – $32,640

Kitchen Remodel in Murfreesboro

$17,280 – $91,200

HVAC Replacement in Murfreesboro

$5,280 – $17,280

Deck Building in Murfreesboro

$4,224 – $11,520

Window Replacement in Murfreesboro

$432 – $1,440

See every Murfreesboro cost guide