How much does water well drilling cost in Plymouth, MN?

Most Plymouth homeowners spend between $5,450 – $14,200 on water well drilling, with an average around $9,800. Local labor prices 9% above the national average, so Plymouth quotes tend to land at the higher end of national ranges.

Why is water well drilling more or less expensive in Plymouth than elsewhere?

Licensed trade labor in Plymouth runs about 109% of the national average, and the best crews book out fastest in spring and early summer. Minnesota weather drives material choices here, so ask contractors what they install most often in Plymouth and why.

Do I need a permit for water well drilling in Plymouth, Minnesota?

Most Plymouth, MN projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Plymouth?

Get at least three written quotes from licensed, insured Minnesota contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Plymouth metro market.

How much does water well drilling cost in 2026?

Most homeowners pay between $5,000 and $13,000, with a national average near $9,000. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per foot?

Installed pricing usually runs $25.00 to $65.00 per foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Water Well Drilling/Plymouth, MN

Plymouth metro · Minnesota

Water Well Drilling cost in Plymouth, MN

Plymouth homeowners typically pay $5,450 – $14,200 for water well drilling. Local labor and materials price 9% above the national average.

Get my Plymouth estimate Use the Plymouth calculator

Plymouth average

$9,800

Typical low

$5,450

Typical high

$14,200

Per foot

$27 – $71

Sample ZIP

What drives Plymouth pricing

Local labor

Licensed trade labor in Plymouth runs about 109% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Plymouth, MN projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Minnesota weather drives material choices here, so ask contractors what they install most often in Plymouth and why.

Instant cost calculator

Adjust the inputs to see live pricing

Well depth (feet)200 feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$5,700 – $7,980

Most homeowners pay around $6,840

Compare quality / material level

Cost by material in Plymouth

Installed Plymouth pricing per foot.

Option	Installed cost	Pros	Cons
Shallow well	$30 – $42	—	—
Standard drilled well	$42 – $55	—	—
Deep rock well	$55 – $71	—	—
Deep well with treatment system	$71 – $98	—	—

Where the money goes in Plymouth

A typical $9,800 Plymouth project, broken down by line item.

Labor0.45% · $44
Materials0.38% · $37
Permits & inspections0.05% · $5
Overhead & profit0.12% · $12

Common add-ons

Extras that show up on Plymouth quotes but rarely in the headline price.

Pump and pressure tank

$1,300 – $4,350

Water testing

$110 – $545

Casing beyond standard

$22 – $55

Filtration or softener

$1,100 – $4,350

Ways to save in Plymouth

Ask neighbors how deep their wells are before budgeting.
Bundle pump, tank and wiring with the drilling contract for one mobilization.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Plymouth FAQs

Get a Plymouth price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your MN ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Plymouth research

Best water well drilling companies in Plymouth Water Well Drilling permits in Minnesota Water Well Drilling near me All Minnesota prices

More Minnesota cities

Minneapolis St. Paul Rochester Duluth Bloomington

Other project costs in Plymouth

Fence Installation in Plymouth

$1,635 – $4,360

Roof Replacement in Plymouth

$9,265 – $37,060

Kitchen Remodel in Plymouth

$19,620 – $103,550

HVAC Replacement in Plymouth

$5,995 – $19,620

Deck Building in Plymouth

$4,796 – $13,080

Window Replacement in Plymouth

$491 – $1,635

See every Plymouth cost guide