How much does water well drilling cost in Tulsa, OK?

Most Tulsa homeowners spend between $4,450 – $11,600 on water well drilling, with an average around $8,000. Local labor prices 11% below the national average, so Tulsa quotes tend to land at the lower end of national ranges.

Why is water well drilling more or less expensive in Tulsa than elsewhere?

Licensed trade labor in Tulsa runs about 89% of the national average, and the best crews book out fastest in spring and early summer. Oklahoma weather drives material choices here, so ask contractors what they install most often in Tulsa and why.

Do I need a permit for water well drilling in Tulsa, Oklahoma?

Most Tulsa, OK projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Tulsa?

Get at least three written quotes from licensed, insured Oklahoma contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Tulsa metro market.

How much does water well drilling cost in 2026?

Most homeowners pay between $5,000 and $13,000, with a national average near $9,000. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per foot?

Installed pricing usually runs $25.00 to $65.00 per foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Water Well Drilling/Tulsa, OK

Tulsa metro · Oklahoma

Water Well Drilling cost in Tulsa, OK

Tulsa homeowners typically pay $4,450 – $11,600 for water well drilling. Local labor and materials price 11% below the national average.

Get my Tulsa estimate Use the Tulsa calculator

Tulsa average

$8,000

Typical low

$4,450

Typical high

$11,600

Per foot

$22 – $58

Sample ZIP

What drives Tulsa pricing

Local labor

Licensed trade labor in Tulsa runs about 89% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Tulsa, OK projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Oklahoma weather drives material choices here, so ask contractors what they install most often in Tulsa and why.

Instant cost calculator

Adjust the inputs to see live pricing

Well depth (feet)200 feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$4,750 – $6,460

Most homeowners pay around $5,605

Compare quality / material level

Cost by material in Tulsa

Installed Tulsa pricing per foot.

Option	Installed cost	Pros	Cons
Shallow well	$25 – $34	—	—
Standard drilled well	$34 – $45	—	—
Deep rock well	$45 – $58	—	—
Deep well with treatment system	$58 – $80	—	—

Where the money goes in Tulsa

A typical $8,000 Tulsa project, broken down by line item.

Labor0.45% · $36
Materials0.38% · $30
Permits & inspections0.05% · $4
Overhead & profit0.12% · $10

Common add-ons

Extras that show up on Tulsa quotes but rarely in the headline price.

Pump and pressure tank

$1,050 – $3,550

Water testing

$89 – $445

Casing beyond standard

$18 – $45

Filtration or softener

$890 – $3,550

Ways to save in Tulsa

Ask neighbors how deep their wells are before budgeting.
Bundle pump, tank and wiring with the drilling contract for one mobilization.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Tulsa FAQs

Get a Tulsa price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your OK ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Tulsa research

Best water well drilling companies in Tulsa Water Well Drilling permits in Oklahoma Water Well Drilling near me All Oklahoma prices

More Oklahoma cities

Oklahoma City Norman Edmond Broken Arrow

Other project costs in Tulsa

Fence Installation in Tulsa

$1,335 – $3,560

Roof Replacement in Tulsa

$7,565 – $30,260

Kitchen Remodel in Tulsa

$16,020 – $84,550

HVAC Replacement in Tulsa

$4,895 – $16,020

Deck Building in Tulsa

$3,916 – $10,680

Window Replacement in Tulsa

$401 – $1,335

See every Tulsa cost guide