How much does cabinet refacing cost in Edmond, OK?

Most Edmond homeowners spend between $2,250 – $7,900 on cabinet refacing, with an average around $5,100. Local labor prices 10% below the national average, so Edmond quotes tend to land at the lower end of national ranges.

Why is cabinet refacing more or less expensive in Edmond than elsewhere?

Licensed trade labor in Edmond runs about 90% of the national average, and the best crews book out fastest in spring and early summer. Oklahoma weather drives material choices here, so ask contractors what they install most often in Edmond and why.

Do I need a permit for cabinet refacing in Edmond, Oklahoma?

Most Edmond, OK projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Edmond?

Get at least three written quotes from licensed, insured Oklahoma contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Edmond metro market.

How much does cabinet refacing cost in 2026?

Most homeowners pay between $2,500 and $8,800, with a national average near $5,650. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per linear foot?

Installed pricing usually runs $100.00 to $350.00 per linear foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-linear foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Cabinet Refacing/Edmond, OK

Edmond metro · Oklahoma

Cabinet Refacing cost in Edmond, OK

Edmond homeowners typically pay $2,250 – $7,900 for cabinet refacing. Local labor and materials price 10% below the national average.

Get my Edmond estimate Use the Edmond calculator

Edmond average

$5,100

Typical low

$2,250

Typical high

$7,900

Per linear foot

$90 – $315

Sample ZIP

What drives Edmond pricing

Local labor

Licensed trade labor in Edmond runs about 90% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Edmond, OK projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Oklahoma weather drives material choices here, so ask contractors what they install most often in Edmond and why.

Instant cost calculator

Adjust the inputs to see live pricing

Cabinet run (linear feet)25 linear feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$2,969 – $4,038

Most homeowners pay around $3,503

Compare quality / material level

Cost by material in Edmond

Installed Edmond pricing per linear foot.

Option	Installed cost	Pros	Cons
Rigid thermofoil	$125 – $170	—	—
Wood veneer	$170 – $225	—	—
Solid wood doors	$225 – $295	—	—
Custom paint-grade solid wood	$295 – $405	—	—

Where the money goes in Edmond

A typical $5,100 Edmond project, broken down by line item.

Labor0.45% · $23
Materials0.38% · $19
Permits & inspections0.05% · $3
Overhead & profit0.12% · $6

Common add-ons

Extras that show up on Edmond quotes but rarely in the headline price.

New hardware

$90 – $540

Soft-close hinges and slides

$180 – $810

Pull-out shelving

$135 – $450

Crown molding

$270 – $1,100

Ways to save in Edmond

Reface only the uppers and paint the lowers for a two-tone look.
Reuse existing hardware if the hole spacing matches.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Edmond FAQs

Get a Edmond price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your OK ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Edmond research

Best cabinet refacing companies in Edmond Cabinet Refacing permits in Oklahoma Cabinet Refacing near me All Oklahoma prices

More Oklahoma cities

Oklahoma City Tulsa Norman Broken Arrow

Other project costs in Edmond

Fence Installation in Edmond

$1,350 – $3,600

Roof Replacement in Edmond

$7,650 – $30,600

Kitchen Remodel in Edmond

$16,200 – $85,500

HVAC Replacement in Edmond

$4,950 – $16,200

Deck Building in Edmond

$3,960 – $10,800

Window Replacement in Edmond

$405 – $1,350

See every Edmond cost guide