How much does cabinet refacing cost in Tulsa, OK?

Most Tulsa homeowners spend between $2,250 – $7,850 on cabinet refacing, with an average around $5,050. Local labor prices 11% below the national average, so Tulsa quotes tend to land at the lower end of national ranges.

Why is cabinet refacing more or less expensive in Tulsa than elsewhere?

Licensed trade labor in Tulsa runs about 89% of the national average, and the best crews book out fastest in spring and early summer. Oklahoma weather drives material choices here, so ask contractors what they install most often in Tulsa and why.

Do I need a permit for cabinet refacing in Tulsa, Oklahoma?

Most Tulsa, OK projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Tulsa?

Get at least three written quotes from licensed, insured Oklahoma contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Tulsa metro market.

How much does cabinet refacing cost in 2026?

Most homeowners pay between $2,500 and $8,800, with a national average near $5,650. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per linear foot?

Installed pricing usually runs $100.00 to $350.00 per linear foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-linear foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Cabinet Refacing/Tulsa, OK

Tulsa metro · Oklahoma

Cabinet Refacing cost in Tulsa, OK

Tulsa homeowners typically pay $2,250 – $7,850 for cabinet refacing. Local labor and materials price 11% below the national average.

Get my Tulsa estimate Use the Tulsa calculator

Tulsa average

$5,050

Typical low

$2,250

Typical high

$7,850

Per linear foot

$89 – $310

Sample ZIP

What drives Tulsa pricing

Local labor

Licensed trade labor in Tulsa runs about 89% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Tulsa, OK projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Oklahoma weather drives material choices here, so ask contractors what they install most often in Tulsa and why.

Instant cost calculator

Adjust the inputs to see live pricing

Cabinet run (linear feet)25 linear feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$2,969 – $4,038

Most homeowners pay around $3,503

Compare quality / material level

Cost by material in Tulsa

Installed Tulsa pricing per linear foot.

Option	Installed cost	Pros	Cons
Rigid thermofoil	$125 – $170	—	—
Wood veneer	$170 – $225	—	—
Solid wood doors	$225 – $290	—	—
Custom paint-grade solid wood	$290 – $400	—	—

Where the money goes in Tulsa

A typical $5,050 Tulsa project, broken down by line item.

Labor0.45% · $23
Materials0.38% · $19
Permits & inspections0.05% · $3
Overhead & profit0.12% · $6

Common add-ons

Extras that show up on Tulsa quotes but rarely in the headline price.

New hardware

$89 – $535

Soft-close hinges and slides

$180 – $800

Pull-out shelving

$135 – $445

Crown molding

$265 – $1,050

Ways to save in Tulsa

Reface only the uppers and paint the lowers for a two-tone look.
Reuse existing hardware if the hole spacing matches.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Tulsa FAQs

Get a Tulsa price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your OK ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Tulsa research

Best cabinet refacing companies in Tulsa Cabinet Refacing permits in Oklahoma Cabinet Refacing near me All Oklahoma prices

More Oklahoma cities

Oklahoma City Norman Edmond Broken Arrow

Other project costs in Tulsa

Fence Installation in Tulsa

$1,335 – $3,560

Roof Replacement in Tulsa

$7,565 – $30,260

Kitchen Remodel in Tulsa

$16,020 – $84,550

HVAC Replacement in Tulsa

$4,895 – $16,020

Deck Building in Tulsa

$3,916 – $10,680

Window Replacement in Tulsa

$401 – $1,335

See every Tulsa cost guide