How much does cabinet refacing cost in Irvine, CA?

Most Irvine homeowners spend between $3,150 – $11,100 on cabinet refacing, with an average around $7,100. Local labor prices 26% above the national average, so Irvine quotes tend to land at the higher end of national ranges.

Why is cabinet refacing more or less expensive in Irvine than elsewhere?

Irvine draws premium contractors and HOA-grade finishes, lifting bids. Mild climate; HOA rules often dictate materials and colors.

Do I need a permit for cabinet refacing in Irvine, California?

City permits plus HOA architectural approval are typical. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Irvine?

Get at least three written quotes from licensed, insured California contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Orange County market.

How much does cabinet refacing cost in 2026?

Most homeowners pay between $2,500 and $8,800, with a national average near $5,650. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per linear foot?

Installed pricing usually runs $100.00 to $350.00 per linear foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-linear foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Cabinet Refacing/Irvine, CA

Orange County · California

Cabinet Refacing cost in Irvine, CA

Irvine homeowners typically pay $3,150 – $11,100 for cabinet refacing. Local labor and materials price 26% above the national average.

Get my Irvine estimate Use the Irvine calculator

Irvine average

$7,100

Typical low

$3,150

Typical high

$11,100

Per linear foot

$125 – $440

Sample ZIP

92602

What drives Irvine pricing

Local labor

Irvine draws premium contractors and HOA-grade finishes, lifting bids.

Permits & code

City permits plus HOA architectural approval are typical.

Climate & conditions

Mild climate; HOA rules often dictate materials and colors.

Instant cost calculator

Adjust the inputs to see live pricing

Cabinet run (linear feet)25 linear feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$4,156 – $5,700

Most homeowners pay around $4,928

Compare quality / material level

Cost by material in Irvine

Installed Irvine pricing per linear foot.

Option	Installed cost	Pros	Cons
Rigid thermofoil	$175 – $240	—	—
Wood veneer	$240 – $320	—	—
Solid wood doors	$320 – $410	—	—
Custom paint-grade solid wood	$410 – $565	—	—

Where the money goes in Irvine

A typical $7,100 Irvine project, broken down by line item.

Labor0.45% · $32
Materials0.38% · $27
Permits & inspections0.05% · $4
Overhead & profit0.12% · $9

Common add-ons

Extras that show up on Irvine quotes but rarely in the headline price.

New hardware

$125 – $755

Soft-close hinges and slides

$250 – $1,150

Pull-out shelving

$190 – $630

Crown molding

$380 – $1,500

Ways to save in Irvine

Reface only the uppers and paint the lowers for a two-tone look.
Reuse existing hardware if the hole spacing matches.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Irvine FAQs

Get a Irvine price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your CA ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Irvine research

Best cabinet refacing companies in Irvine Cabinet Refacing permits in California Cabinet Refacing near me All California prices

Cabinet Refacing cost near Irvine

Cabinet Refacing cost in Anaheim, CA

$3,000 – $10,571

Cabinet Refacing cost in Santa Ana, CA

$2,975 – $10,483

More California cities

Los Angeles San Diego San Jose San Francisco Oakland Sacramento Fresno Long Beach

Other project costs in Irvine

Fence Installation in Irvine

$1,890 – $5,040

Roof Replacement in Irvine

$10,710 – $42,840

Kitchen Remodel in Irvine

$22,680 – $119,700

HVAC Replacement in Irvine

$6,930 – $22,680

Deck Building in Irvine

$5,544 – $15,120

Window Replacement in Irvine

$567 – $1,890

See every Irvine cost guide