How much does cabinet refacing cost in San Francisco, CA?

Most San Francisco homeowners spend between $3,650 – $12,800 on cabinet refacing, with an average around $8,200. Local labor prices 45% above the national average, so San Francisco quotes tend to land at the higher end of national ranges.

Why is cabinet refacing more or less expensive in San Francisco than elsewhere?

SF is the most expensive labor market on the West Coast; access and parking add to bids. Fog, damp and hillside conditions favor moisture-resistant assemblies.

Do I need a permit for cabinet refacing in San Francisco, California?

SF DBI permits, historic review and neighborhood notification are common on exterior work. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in San Francisco?

Get at least three written quotes from licensed, insured California contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Bay Area market.

How much does cabinet refacing cost in 2026?

Most homeowners pay between $2,500 and $8,800, with a national average near $5,650. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per linear foot?

Installed pricing usually runs $100.00 to $350.00 per linear foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-linear foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Cabinet Refacing/San Francisco, CA

Bay Area · California

Cabinet Refacing cost in San Francisco, CA

San Francisco homeowners typically pay $3,650 – $12,800 for cabinet refacing. Local labor and materials price 45% above the national average.

Get my San Francisco estimate Use the San Francisco calculator

San Francisco average

$8,200

Typical low

$3,650

Typical high

$12,800

Per linear foot

$145 – $510

Sample ZIP

94103

What drives San Francisco pricing

Local labor

SF is the most expensive labor market on the West Coast; access and parking add to bids.

Permits & code

SF DBI permits, historic review and neighborhood notification are common on exterior work.

Climate & conditions

Fog, damp and hillside conditions favor moisture-resistant assemblies.

Instant cost calculator

Adjust the inputs to see live pricing

Cabinet run (linear feet)25 linear feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$4,750 – $6,531

Most homeowners pay around $5,641

Compare quality / material level

Cost by material in San Francisco

Installed San Francisco pricing per linear foot.

Option	Installed cost	Pros	Cons
Rigid thermofoil	$200 – $275	—	—
Wood veneer	$275 – $365	—	—
Solid wood doors	$365 – $475	—	—
Custom paint-grade solid wood	$475 – $655	—	—

Where the money goes in San Francisco

A typical $8,200 San Francisco project, broken down by line item.

Labor0.45% · $37
Materials0.38% · $31
Permits & inspections0.05% · $4
Overhead & profit0.12% · $10

Common add-ons

Extras that show up on San Francisco quotes but rarely in the headline price.

New hardware

$145 – $870

Soft-close hinges and slides

$290 – $1,300

Pull-out shelving

$220 – $725

Crown molding

$435 – $1,750

Ways to save in San Francisco

Reface only the uppers and paint the lowers for a two-tone look.
Reuse existing hardware if the hole spacing matches.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

San Francisco FAQs

Get a San Francisco price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your CA ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More San Francisco research

Best cabinet refacing companies in San Francisco Cabinet Refacing permits in California Cabinet Refacing near me All California prices

Cabinet Refacing cost near San Francisco

Cabinet Refacing cost in San Jose, CA

$3,474 – $12,182

Cabinet Refacing cost in Oakland, CA

$3,323 – $11,652

Cabinet Refacing cost in Fremont, CA

$3,398 – $11,917

Cabinet Refacing cost in San Mateo, CA

$3,524 – $12,359

Cabinet Refacing cost in Berkeley, CA

$3,373 – $11,829

Cabinet Refacing cost in Walnut Creek, CA

$3,272 – $11,476

More California cities

Los Angeles San Diego Sacramento Fresno Long Beach Anaheim Santa Ana Irvine

Other project costs in San Francisco

Fence Installation in San Francisco

$2,175 – $5,800

Roof Replacement in San Francisco

$12,325 – $49,300

Kitchen Remodel in San Francisco

$26,100 – $137,750

HVAC Replacement in San Francisco

$7,975 – $26,100

Deck Building in San Francisco

$6,380 – $17,400

Window Replacement in San Francisco

$653 – $2,175

See every San Francisco cost guide