How much does cabinet refacing cost in Riverside, CA?

Most Riverside homeowners spend between $2,650 – $9,350 on cabinet refacing, with an average around $6,000. Local labor prices 6% above the national average, so Riverside quotes tend to land at the higher end of national ranges.

Why is cabinet refacing more or less expensive in Riverside than elsewhere?

Inland Empire labor is 15-20% cheaper than coastal Southern California. Hot inland summers push HVAC and insulation spend.

Do I need a permit for cabinet refacing in Riverside, California?

Riverside permits required for structural, roofing and electrical work. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Riverside?

Get at least three written quotes from licensed, insured California contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Inland Empire market.

How much does cabinet refacing cost in 2026?

Most homeowners pay between $2,500 and $8,800, with a national average near $5,650. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per linear foot?

Installed pricing usually runs $100.00 to $350.00 per linear foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-linear foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Cabinet Refacing/Riverside, CA

Inland Empire · California

Cabinet Refacing cost in Riverside, CA

Riverside homeowners typically pay $2,650 – $9,350 for cabinet refacing. Local labor and materials price 6% above the national average.

Get my Riverside estimate Use the Riverside calculator

Riverside average

$6,000

Typical low

$2,650

Typical high

$9,350

Per linear foot

$105 – $370

Sample ZIP

92501

What drives Riverside pricing

Local labor

Inland Empire labor is 15-20% cheaper than coastal Southern California.

Permits & code

Riverside permits required for structural, roofing and electrical work.

Climate & conditions

Hot inland summers push HVAC and insulation spend.

Instant cost calculator

Adjust the inputs to see live pricing

Cabinet run (linear feet)25 linear feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$3,563 – $4,869

Most homeowners pay around $4,216

Compare quality / material level

Cost by material in Riverside

Installed Riverside pricing per linear foot.

Option	Installed cost	Pros	Cons
Rigid thermofoil	$150 – $205	—	—
Wood veneer	$205 – $265	—	—
Solid wood doors	$265 – $345	—	—
Custom paint-grade solid wood	$345 – $475	—	—

Where the money goes in Riverside

A typical $6,000 Riverside project, broken down by line item.

Labor0.45% · $27
Materials0.38% · $23
Permits & inspections0.05% · $3
Overhead & profit0.12% · $7

Common add-ons

Extras that show up on Riverside quotes but rarely in the headline price.

New hardware

$105 – $635

Soft-close hinges and slides

$210 – $955

Pull-out shelving

$160 – $530

Crown molding

$320 – $1,250

Ways to save in Riverside

Reface only the uppers and paint the lowers for a two-tone look.
Reuse existing hardware if the hole spacing matches.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Riverside FAQs

Get a Riverside price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your CA ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Riverside research

Best cabinet refacing companies in Riverside Cabinet Refacing permits in California Cabinet Refacing near me All California prices

Cabinet Refacing cost near Riverside

Cabinet Refacing cost in San Bernardino, CA

$2,575 – $9,085

Cabinet Refacing cost in Temecula, CA

$2,700 – $9,526

More California cities

Los Angeles San Diego San Jose San Francisco Oakland Sacramento Fresno Long Beach

Other project costs in Riverside

Fence Installation in Riverside

$1,590 – $4,240

Roof Replacement in Riverside

$9,010 – $36,040

Kitchen Remodel in Riverside

$19,080 – $100,700

HVAC Replacement in Riverside

$5,830 – $19,080

Deck Building in Riverside

$4,664 – $12,720

Window Replacement in Riverside

$477 – $1,590

See every Riverside cost guide