How much does deck building cost in Burbank, CA?

Most Burbank homeowners spend between $5,550 – $15,100 on deck building, with an average around $10,100. Local labor prices 26% above the national average, so Burbank quotes tend to land at the higher end of national ranges.

How many quotes should I get in Burbank?

Get at least three written quotes from licensed, insured California contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Los Angeles market.

How much does a deck cost per square foot?

$15 to $80 per square foot installed. Pressure-treated pine runs $15–$35, composite $30–$60 and tropical hardwood $40–$80.

Is composite decking worth it?

Composite costs roughly twice as much upfront but eliminates staining every two to three years, so it typically wins over a 15+ year hold.

Do I need a permit for a deck?

Almost always if the deck is attached to the house or more than 30 inches above grade. Permits run $150 to $800.

How long does deck construction take?

One to two weeks for a standard deck, plus permit review time before the crew starts.

Does a deck add value to my home?

A wood deck addition typically returns 50% to 65% of its cost at resale, and it is one of the most-requested outdoor features in listings.

What is the cheapest way to build a deck?

Keep it rectangular, ground level and under 200 square feet, frame and surface it in pressure-treated pine, and skip railing, stairs and picture framing.

Home/Cost guides/Deck Building/Burbank, CA

Los Angeles · California

Deck Building cost in Burbank, CA

Burbank homeowners typically pay $5,550 – $15,100 for deck building. Local labor and materials price 26% above the national average.

Get my Burbank estimate Use the Burbank calculator

Burbank average

$10,100

Typical low

$5,550

Typical high

$15,100

Per square foot

$19 – $100

Sample ZIP

91502

What drives Burbank pricing

Local labor

Licensed Burbank contractors carry California workers' comp and prevailing wage pressure, and crews here quote roughly 26% above the national labor average. Demand in the Los Angeles market peaks in spring, so booking early usually beats a rush premium.

Permits & code

Burbank follows the California Building Standards Code, so most structural, electrical, plumbing and re-roof work needs a permit from the Burbank building department plus Title 24 energy compliance. Seismic bracing and soft-story retrofit rules apply to many older LA-area properties, and hillside lots trigger extra geotechnical review.

Climate & conditions

Burbank sits in a warm Mediterranean climate with intense summer sun, so expect UV-stable, heat-tolerant materials and shaded scheduling in peak summer.

Instant cost calculator

Adjust the inputs to see live pricing

Deck size350 square feet

Decking material

Height above grade

Railing

Shape

Estimated project cost

$6,650 – $15,400

Most homeowners pay around $11,025

Compare decking material

Cost by material in Burbank

Installed Burbank pricing per square foot.

Option	Installed cost	Pros	Cons
Pressure-treated pine	$19 – $44	Cheapest framing and surface option	Needs sealing every 2-3 years; can warp
Cedar	$32 – $57	Naturally rot resistant, ages well	Soft surface, annual maintenance
Redwood	$38 – $63	Rich color, stable	Limited supply outside the West
Composite (Trex, TimberTech)	$38 – $76	No staining, 25-year warranties	Gets hot in sun, higher upfront
PVC / cellular vinyl	$44 – $88	Fully waterproof, lightest maintenance	Most expensive mainstream option
Tropical hardwood (ipe, cumaru)	$50 – $100	Extremely durable, premium look	Hard to cut, needs oiling to keep color
Aluminum	$57 – $115	Will not rot, rust or burn	Industrial look, noisy underfoot

Where the money goes in Burbank

A typical $10,100 Burbank project, broken down by line item.

Decking & railing material45% · $4,545
Labor35% · $3,535
Framing, footings & hardware15% · $1,515
Permits & disposal5% · $505

Common add-ons

Extras that show up on Burbank quotes but rarely in the headline price.

Stairs

Per step

$125 – $315

Built-in bench seating

$755 – $3,150

Pergola or shade structure

$3,150 – $11,300

Under-deck drainage

$1,900 – $6,300

Deck lighting

$505 – $3,150

Old deck demolition

Per square foot

$6 – $19

Permit

$190 – $1,000

Ways to save in Burbank

Keep the deck rectangular and under 200 sq ft where codes ease off.
Frame with pressure-treated lumber and spend only on the visible deck surface.
Build ground level — every foot of elevation adds framing, footings and railing.
Schedule in fall when builders discount to keep crews busy.
Skip fascia wraps and picture framing details that add labor with no structural value.

Burbank FAQs

Get a Burbank price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your CA ZIP code — then connect you with vetted local pros.

Get deck quotes

More Burbank research

Best deck building companies in Burbank Deck Building permits in California Free deck building quotes in Burbank Affordable deck building in Burbank Emergency deck building in Burbank Deck Building cost per unit in Burbank Deck Building near me All California prices

Deck Building cost near Burbank

Deck Building cost in Los Angeles, CA

$5,462 – $14,860

Deck Building cost in Long Beach, CA

$5,374 – $14,621

Deck Building cost in Pasadena, CA

$5,638 – $15,340

Deck Building cost in Glendale, CA

$5,506 – $14,980

Deck Building cost in Santa Clarita, CA

$5,110 – $13,902

Deck Building cost in Torrance, CA

$5,418 – $14,740

More California cities

San Diego San Jose San Francisco Oakland Sacramento Fresno Anaheim Santa Ana

Other project costs in Burbank

Fence Installation in Burbank

$1,890 – $5,040

Roof Replacement in Burbank

$10,710 – $42,840

Kitchen Remodel in Burbank

$22,680 – $119,700

HVAC Replacement in Burbank

$6,930 – $22,680

Window Replacement in Burbank

$567 – $1,890

Bathroom Remodel in Burbank

$8,190 – $47,880

See every Burbank cost guide