Fence Installation cost in Burbank, CA
Burbank homeowners typically pay $1,900 – $5,050 for fence installation. Local labor and materials price 26% above the national average.
Burbank average
$3,200
Typical low
$1,900
Typical high
$5,050
Per linear foot
$1 – $57
Sample ZIP
91502
What drives Burbank pricing
Local labor
Licensed Burbank contractors carry California workers' comp and prevailing wage pressure, and crews here quote roughly 26% above the national labor average. Demand in the Los Angeles market peaks in spring, so booking early usually beats a rush premium.
Permits & code
Burbank follows the California Building Standards Code, so most structural, electrical, plumbing and re-roof work needs a permit from the Burbank building department plus Title 24 energy compliance. Seismic bracing and soft-story retrofit rules apply to many older LA-area properties, and hillside lots trigger extra geotechnical review.
Climate & conditions
Burbank sits in a warm Mediterranean climate with intense summer sun, so expect UV-stable, heat-tolerant materials and shaded scheduling in peak summer.
Instant cost calculator
Adjust the inputs to see live pricing
Estimated project cost
$171 – $1,028
Most homeowners pay around $600
Compare fence material
Cost by material in Burbank
Installed Burbank pricing per linear foot.
| Option | Installed cost |
|---|---|
| Barbed wire | $1 – $8 |
| Electric / invisible | $1 – $8 |
| Woven wire | $3 – $5 |
| Metal chain link | $6 – $50 |
| Wood & privacy | $13 – $25 |
| Composite & Trex | $19 – $57 |
| Vinyl / PVC | $25 – $32 |
| Aluminum or steel | $25 – $38 |
| Wrought iron | $25 – $44 |
| Brick, stone or block | $38 – $76 |
Where the money goes in Burbank
A typical $3,200 Burbank project, broken down by line item.
- Materials55% · $1,760
- Labor35% · $1,120
- Prep, permits & disposal10% · $320
Common add-ons
Extras that show up on Burbank quotes but rarely in the headline price.
Walk gate (per gate)
Driveway or double gate
Automatic gate opener
Old fence removal & haul-off
Per linear foot
Property survey
Building permit
Stain or seal wood fence
Per linear foot
Post-hole drilling in rock
Per post surcharge
Ways to save in Burbank
- Get three bids: fence pricing spreads 20–40% between contractors in the same ZIP.
- Build in the off-season (late fall or winter) when crews are hungry for work.
- Share the cost with a neighbor on a shared property line — many split 50/50.
- Keep the run straight and simple; every corner, gate and grade change adds labor.
- Choose 4-foot picket instead of 6-foot privacy where privacy is not needed to cut roughly 15%.
- Do the demo and brush clearing yourself to save $3 to $5 per foot.
- Buy the material yourself only if the pro allows it — most get volume discounts you cannot match.
Burbank FAQs
Get a Burbank price you can budget against
Answer a few questions about your project and we'll model a low, average and premium price for your CA ZIP code — then connect you with vetted local pros.
Get fence quotesMore Burbank research
Fence Installation cost near Burbank
Fence Installation cost in Los Angeles, CA
$1,870 – $4,970
Fence Installation cost in Long Beach, CA
$1,840 – $4,890
Fence Installation cost in Pasadena, CA
$1,930 – $5,130
Fence Installation cost in Glendale, CA
$1,885 – $5,010
Fence Installation cost in Santa Clarita, CA
$1,749 – $4,649
Fence Installation cost in Torrance, CA
$1,855 – $4,930