How much does drywall installation cost in Arlington, TX?

Most Arlington homeowners spend between $1,500 – $3,450 on drywall installation, with an average around $2,500. Local labor prices 1% below the national average, so Arlington quotes tend to land at the lower end of national ranges.

Why is drywall installation more or less expensive in Arlington than elsewhere?

Mid-cities crews are competitively priced with strong availability. Storm season concentrates roofing demand in spring.

Do I need a permit for drywall installation in Arlington, Texas?

City permits required for roofing, fences and structural work. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Arlington?

Get at least three written quotes from licensed, insured Texas contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Dallas-Fort Worth market.

How much does drywall installation cost in 2026?

Most homeowners pay between $1,500 and $3,500, with a national average near $2,500. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per square foot?

Installed pricing usually runs $1.50 to $3.50 per square foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-square foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Drywall Installation/Arlington, TX

Dallas-Fort Worth · Texas

Drywall Installation cost in Arlington, TX

Arlington homeowners typically pay $1,500 – $3,450 for drywall installation. Local labor and materials price 1% below the national average.

Get my Arlington estimate Use the Arlington calculator

Arlington average

$2,500

Typical low

$1,500

Typical high

$3,450

Per square foot

$1 – $3

Sample ZIP

76010

What drives Arlington pricing

Local labor

Mid-cities crews are competitively priced with strong availability.

Permits & code

City permits required for roofing, fences and structural work.

Climate & conditions

Storm season concentrates roofing demand in spring.

Instant cost calculator

Adjust the inputs to see live pricing

Drywall area (sq ft)1,000 square feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$1,454 – $2,005

Most homeowners pay around $1,729

Compare quality / material level

Cost by material in Arlington

Installed Arlington pricing per square foot.

Option	Installed cost	Pros	Cons
Hang only	$2 – $2	—	—
Hang, tape and finish (Level 4)	$2 – $3	—	—
Level 5 smooth finish	$3 – $4	—	—
Moisture / fire-rated assemblies	$4 – $5	—	—

Where the money goes in Arlington

A typical $2,500 Arlington project, broken down by line item.

Labor0.45% · $11
Materials0.38% · $10
Permits & inspections0.05% · $1
Overhead & profit0.12% · $3

Common add-ons

Extras that show up on Arlington quotes but rarely in the headline price.

Ceiling texture removal

$495 – $2,500

Insulation before board

$395 – $2,000

Corner bead and archways

$150 – $790

Painting after finish

$495 – $2,500

Ways to save in Arlington

Order board delivered to the room to avoid carry charges.
Accept a Level 4 finish unless walls take raking light.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Arlington FAQs

Get a Arlington price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your TX ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Arlington research

Best drywall installation companies in Arlington Drywall Installation permits in Texas Drywall Installation near me All Texas prices

Drywall Installation cost near Arlington

Drywall Installation cost in Dallas, TX

$1,545 – $3,555

Drywall Installation cost in Fort Worth, TX

$1,515 – $3,485

Drywall Installation cost in Plano, TX

$1,591 – $3,659

Drywall Installation cost in Frisco, TX

$1,606 – $3,694

Drywall Installation cost in Irving, TX

$1,515 – $3,485

Drywall Installation cost in McKinney, TX

$1,576 – $3,624

More Texas cities

Denton Garland Houston Katy Sugar Land The Woodlands Pearland Pasadena

Other project costs in Arlington

Fence Installation in Arlington

$1,485 – $3,960

Roof Replacement in Arlington

$8,415 – $33,660

Kitchen Remodel in Arlington

$17,820 – $94,050

HVAC Replacement in Arlington

$5,445 – $17,820

Deck Building in Arlington

$4,356 – $11,880

Window Replacement in Arlington

$446 – $1,485

See every Arlington cost guide