How much does ductwork replacement cost in Bloomington, MN?

Most Bloomington homeowners spend between $4,050 – $9,700 on ductwork replacement, with an average around $6,900. Local labor prices 8% above the national average, so Bloomington quotes tend to land at the higher end of national ranges.

Why is ductwork replacement more or less expensive in Bloomington than elsewhere?

Licensed trade labor in Bloomington runs about 108% of the national average, and the best crews book out fastest in spring and early summer. Minnesota weather drives material choices here, so ask contractors what they install most often in Bloomington and why.

Do I need a permit for ductwork replacement in Bloomington, Minnesota?

Most Bloomington, MN projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Bloomington?

Get at least three written quotes from licensed, insured Minnesota contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Bloomington metro market.

How much does ductwork replacement cost in 2026?

Most homeowners pay between $3,750 and $9,000, with a national average near $6,375. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per linear foot?

Installed pricing usually runs $25.00 to $60.00 per linear foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-linear foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Ductwork Replacement/Bloomington, MN

Bloomington metro · Minnesota

Ductwork Replacement cost in Bloomington, MN

Bloomington homeowners typically pay $4,050 – $9,700 for ductwork replacement. Local labor and materials price 8% above the national average.

Get my Bloomington estimate Use the Bloomington calculator

Bloomington average

$6,900

Typical low

$4,050

Typical high

$9,700

Per linear foot

$27 – $65

Sample ZIP

What drives Bloomington pricing

Local labor

Licensed trade labor in Bloomington runs about 108% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Bloomington, MN projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Minnesota weather drives material choices here, so ask contractors what they install most often in Bloomington and why.

Instant cost calculator

Adjust the inputs to see live pricing

Duct run (linear feet)150 linear feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$3,990 – $5,558

Most homeowners pay around $4,774

Compare quality / material level

Cost by material in Bloomington

Installed Bloomington pricing per linear foot.

Option	Installed cost	Pros	Cons
Flexible duct	$28 – $39	—	—
Sheet metal trunk and flex runs	$39 – $51	—	—
Insulated sheet metal	$51 – $67	—	—
Custom sealed metal with zoning	$67 – $92	—	—

Where the money goes in Bloomington

A typical $6,900 Bloomington project, broken down by line item.

Labor0.45% · $31
Materials0.38% · $26
Permits & inspections0.05% · $3
Overhead & profit0.12% · $8

Common add-ons

Extras that show up on Bloomington quotes but rarely in the headline price.

Duct sealing (Aeroseal)

$1,100 – $3,250

New returns

$325 – $1,300

Zoning dampers

$1,600 – $4,850

Asbestos duct wrap removal

$1,100 – $5,400

Ways to save in Bloomington

Replace ducts while the system is being replaced — one mobilization.
Seal instead of replace when ducts are intact but leaky.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Bloomington FAQs

Get a Bloomington price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your MN ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Bloomington research

Best ductwork replacement companies in Bloomington Ductwork Replacement permits in Minnesota Ductwork Replacement near me All Minnesota prices

Ductwork Replacement cost near Bloomington

Ductwork Replacement cost in Bloomington, IN

$3,412 – $8,173

More Minnesota cities

Minneapolis St. Paul Rochester Duluth Plymouth

Other project costs in Bloomington

Fence Installation in Bloomington

$1,620 – $4,320

Roof Replacement in Bloomington

$9,180 – $36,720

Kitchen Remodel in Bloomington

$19,440 – $102,600

HVAC Replacement in Bloomington

$5,940 – $19,440

Deck Building in Bloomington

$4,752 – $12,960

Window Replacement in Bloomington

$486 – $1,620

See every Bloomington cost guide