How much does ductwork replacement cost in Murfreesboro, TN?

Most Murfreesboro homeowners spend between $3,600 – $8,650 on ductwork replacement, with an average around $6,100. Local labor prices 4% below the national average, so Murfreesboro quotes tend to land at the lower end of national ranges.

Why is ductwork replacement more or less expensive in Murfreesboro than elsewhere?

Licensed trade labor in Murfreesboro runs about 96% of the national average, and the best crews book out fastest in spring and early summer. Tennessee weather drives material choices here, so ask contractors what they install most often in Murfreesboro and why.

Do I need a permit for ductwork replacement in Murfreesboro, Tennessee?

Most Murfreesboro, TN projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Murfreesboro?

Get at least three written quotes from licensed, insured Tennessee contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Murfreesboro metro market.

How much does ductwork replacement cost in 2026?

Most homeowners pay between $3,750 and $9,000, with a national average near $6,375. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per linear foot?

Installed pricing usually runs $25.00 to $60.00 per linear foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-linear foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Ductwork Replacement/Murfreesboro, TN

Murfreesboro metro · Tennessee

Ductwork Replacement cost in Murfreesboro, TN

Murfreesboro homeowners typically pay $3,600 – $8,650 for ductwork replacement. Local labor and materials price 4% below the national average.

Get my Murfreesboro estimate Use the Murfreesboro calculator

Murfreesboro average

$6,100

Typical low

$3,600

Typical high

$8,650

Per linear foot

$24 – $58

Sample ZIP

What drives Murfreesboro pricing

Local labor

Licensed trade labor in Murfreesboro runs about 96% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Murfreesboro, TN projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Tennessee weather drives material choices here, so ask contractors what they install most often in Murfreesboro and why.

Instant cost calculator

Adjust the inputs to see live pricing

Duct run (linear feet)150 linear feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$3,563 – $4,988

Most homeowners pay around $4,275

Compare quality / material level

Cost by material in Murfreesboro

Installed Murfreesboro pricing per linear foot.

Option	Installed cost	Pros	Cons
Flexible duct	$25 – $35	—	—
Sheet metal trunk and flex runs	$35 – $46	—	—
Insulated sheet metal	$46 – $59	—	—
Custom sealed metal with zoning	$59 – $82	—	—

Where the money goes in Murfreesboro

A typical $6,100 Murfreesboro project, broken down by line item.

Labor0.45% · $27
Materials0.38% · $23
Permits & inspections0.05% · $3
Overhead & profit0.12% · $7

Common add-ons

Extras that show up on Murfreesboro quotes but rarely in the headline price.

Duct sealing (Aeroseal)

$960 – $2,900

New returns

$290 – $1,150

Zoning dampers

$1,450 – $4,300

Asbestos duct wrap removal

$960 – $4,800

Ways to save in Murfreesboro

Replace ducts while the system is being replaced — one mobilization.
Seal instead of replace when ducts are intact but leaky.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Murfreesboro FAQs

Get a Murfreesboro price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your TN ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Murfreesboro research

Best ductwork replacement companies in Murfreesboro Ductwork Replacement permits in Tennessee Ductwork Replacement near me All Tennessee prices

More Tennessee cities

Nashville Memphis Knoxville Chattanooga Franklin

Other project costs in Murfreesboro

Fence Installation in Murfreesboro

$1,440 – $3,840

Roof Replacement in Murfreesboro

$8,160 – $32,640

Kitchen Remodel in Murfreesboro

$17,280 – $91,200

HVAC Replacement in Murfreesboro

$5,280 – $17,280

Deck Building in Murfreesboro

$4,224 – $11,520

Window Replacement in Murfreesboro

$432 – $1,440

See every Murfreesboro cost guide