How much does ductwork replacement cost in Rockville, MD?

Most Rockville homeowners spend between $4,600 – $11,100 on ductwork replacement, with an average around $7,850. Local labor prices 23% above the national average, so Rockville quotes tend to land at the higher end of national ranges.

Why is ductwork replacement more or less expensive in Rockville than elsewhere?

Licensed trade labor in Rockville runs about 123% of the national average, and the best crews book out fastest in spring and early summer. Maryland weather drives material choices here, so ask contractors what they install most often in Rockville and why.

Do I need a permit for ductwork replacement in Rockville, Maryland?

Most Rockville, MD projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Rockville?

Get at least three written quotes from licensed, insured Maryland contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Rockville metro market.

How much does ductwork replacement cost in 2026?

Most homeowners pay between $3,750 and $9,000, with a national average near $6,375. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per linear foot?

Installed pricing usually runs $25.00 to $60.00 per linear foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-linear foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Ductwork Replacement/Rockville, MD

Rockville metro · Maryland

Ductwork Replacement cost in Rockville, MD

Rockville homeowners typically pay $4,600 – $11,100 for ductwork replacement. Local labor and materials price 23% above the national average.

Get my Rockville estimate Use the Rockville calculator

Rockville average

$7,850

Typical low

$4,600

Typical high

$11,100

Per linear foot

$31 – $74

Sample ZIP

What drives Rockville pricing

Local labor

Licensed trade labor in Rockville runs about 123% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Rockville, MD projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Maryland weather drives material choices here, so ask contractors what they install most often in Rockville and why.

Instant cost calculator

Adjust the inputs to see live pricing

Duct run (linear feet)150 linear feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$4,560 – $6,270

Most homeowners pay around $5,415

Compare quality / material level

Cost by material in Rockville

Installed Rockville pricing per linear foot.

Option	Installed cost	Pros	Cons
Flexible duct	$32 – $44	—	—
Sheet metal trunk and flex runs	$44 – $59	—	—
Insulated sheet metal	$59 – $76	—	—
Custom sealed metal with zoning	$76 – $105	—	—

Where the money goes in Rockville

A typical $7,850 Rockville project, broken down by line item.

Labor0.45% · $35
Materials0.38% · $30
Permits & inspections0.05% · $4
Overhead & profit0.12% · $9

Common add-ons

Extras that show up on Rockville quotes but rarely in the headline price.

Duct sealing (Aeroseal)

$1,250 – $3,700

New returns

$370 – $1,500

Zoning dampers

$1,850 – $5,550

Asbestos duct wrap removal

$1,250 – $6,150

Ways to save in Rockville

Replace ducts while the system is being replaced — one mobilization.
Seal instead of replace when ducts are intact but leaky.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Rockville FAQs

Get a Rockville price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your MD ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Rockville research

Best ductwork replacement companies in Rockville Ductwork Replacement permits in Maryland Ductwork Replacement near me All Maryland prices

More Maryland cities

Baltimore Columbia Silver Spring Annapolis Frederick

Other project costs in Rockville

Fence Installation in Rockville

$1,845 – $4,920

Roof Replacement in Rockville

$10,455 – $41,820

Kitchen Remodel in Rockville

$22,140 – $116,850

HVAC Replacement in Rockville

$6,765 – $22,140

Deck Building in Rockville

$5,412 – $14,760

Window Replacement in Rockville

$554 – $1,845

See every Rockville cost guide