How much does excavation and grading cost in Greensboro, NC?

Most Greensboro homeowners spend between $7,150 – $21,400 on excavation and grading, with an average around $14,300. Local labor prices 5% below the national average, so Greensboro quotes tend to land at the lower end of national ranges.

Why is excavation and grading more or less expensive in Greensboro than elsewhere?

Licensed trade labor in Greensboro runs about 95% of the national average, and the best crews book out fastest in spring and early summer. North Carolina weather drives material choices here, so ask contractors what they install most often in Greensboro and why.

Do I need a permit for excavation and grading in Greensboro, North Carolina?

Most Greensboro, NC projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Greensboro?

Get at least three written quotes from licensed, insured North Carolina contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Greensboro metro market.

How much does excavation and grading cost in 2026?

Most homeowners pay between $7,500 and $22,500, with a national average near $15,000. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per cubic yard?

Installed pricing usually runs $50.00 to $150.00 per cubic yard, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-cubic yard price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Excavation and Grading/Greensboro, NC

Greensboro metro · North Carolina

Excavation and Grading cost in Greensboro, NC

Greensboro homeowners typically pay $7,150 – $21,400 for excavation and grading. Local labor and materials price 5% below the national average.

Get my Greensboro estimate Use the Greensboro calculator

Greensboro average

$14,300

Typical low

$7,150

Typical high

$21,400

Per cubic yard

$48 – $145

Sample ZIP

What drives Greensboro pricing

Local labor

Licensed trade labor in Greensboro runs about 95% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Greensboro, NC projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

North Carolina weather drives material choices here, so ask contractors what they install most often in Greensboro and why.

Instant cost calculator

Adjust the inputs to see live pricing

Material to move (cubic yards)150 cubic yards

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$8,408 – $11,543

Most homeowners pay around $9,975

Compare quality / material level

Cost by material in Greensboro

Installed Greensboro pricing per cubic yard.

Option	Installed cost	Pros	Cons
Simple grading	$59 – $81	—	—
Standard excavation and haul	$81 – $105	—	—
Rock or difficult soil	$105 – $140	—	—
Excavation with retaining and drainage	$140 – $190	—	—

Where the money goes in Greensboro

A typical $14,300 Greensboro project, broken down by line item.

Labor0.45% · $64
Materials0.38% · $54
Permits & inspections0.05% · $7
Overhead & profit0.12% · $17

Common add-ons

Extras that show up on Greensboro quotes but rarely in the headline price.

Soil haul-off

$19 – $57

Rock breaking

$95 – $285

Erosion control

$475 – $2,850

Compaction testing

$380 – $1,450

Ways to save in Greensboro

Keep excavated soil on site for backfill and berms to avoid haul-off.
Schedule when the ground is dry — wet soil doubles handling time.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Greensboro FAQs

Get a Greensboro price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your NC ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Greensboro research

Best excavation and grading companies in Greensboro Excavation and Grading permits in North Carolina Excavation and Grading near me All North Carolina prices

More North Carolina cities

Charlotte Raleigh Durham Winston-Salem Asheville Cary Wilmington

Other project costs in Greensboro

Fence Installation in Greensboro

$1,425 – $3,800

Roof Replacement in Greensboro

$8,075 – $32,300

Kitchen Remodel in Greensboro

$17,100 – $90,250

HVAC Replacement in Greensboro

$5,225 – $17,100

Deck Building in Greensboro

$4,180 – $11,400

Window Replacement in Greensboro

$428 – $1,425

See every Greensboro cost guide